4g67 turbo..

[owndferra]

play play, seems like bro owndferra going for monster project setup

no laa..just try to study lor..hehehe

 

[normality78]

dun just study it. DO it...!!

 

[owndferra]

yaa i really want to DO it but i need cash in the first place.hehhehehe..
trying so hard to save the cash...

 

[goo_61t]

good info bro, bt one thing , all vr4's have 7.8:1 compression, only evo 1&2 has 8.5:1

hurm realy arr bro..have to check back on that laa..mebe miss interprated the info i got sumwhere hurmm.. but sure haa 7.8:1 that's too low man..

 

[goo_61t]

try to look into this 4g67 project http://forum.4g61t.org/viewtopic.php?search_id=1456877537&t=24191

 

[goo_61t]

JINKL was rite huhu i misinterpreted my info, correction everyone vr4's compression ratios is 7.8:1 while evo 1&2 8.5:1 9.0:1 is evo 3 rite JINKL??
jeng..jeng..jeng..now we kow already laa who is the sifuuu here huhuh JINKL share2 laa sumore hahahaha :p

 

[normality78]

RM20K for the project..... hehehehe.... i doubt he will spent later. SO pain ....kekekeke

 

[goo_61t]

RM20K for the project..... hehehehe.... i doubt he will spent later. SO pain ....kekekeke

NO pain NO gain laa bro hahahahaha...

 

[owndferra]

walaneh..RM20k..this is for sure laa too pain..
hehehe...if we oredi have 4g63 vr4 engine..is it still need RM20k for modding??

 

[goo_61t]

aiya bro..main kereta like this laa..
as the mods list's goes on the money also go on laaa bro
but 20K for a 4g67 project must be a killer then huhu mesti wallauwee punye power maa.

 

[owndferra]

no laa..just a bit surprised..i tot to mod 4g67 stock turbo oredi need 20K..
hehehe,20k i think i can build my ride to monster..hehehe..so now i understand..

 

[goo_61t]

no need 20k if you are going for a straight up plug and play stuffs from vr4, BUT if you are going for forged material then 20K might be not enough laa hehehe. Mine also spent quit alot already huhu but what to do. minat maaa..

 

[owndferra]

no need 20k if you are going for a straight up plug and play stuffs from vr4, BUT if you are going for forged material then 20K might be not enough laa hehehe. Mine also spent quit alot already huhu but what to do. minat maaa..

oowwhh,so what car u r drive bro??
r u also 4g67 owner??

 

[goo_61t]

me drive saga only maa..63 inside laa not 67.But i have frens with 67 in putra stroker kits sum more huhu..

 

[owndferra]

me drive saga only maa..63 inside laa not 67.But i have frens with 67 in putra stroker kits sum more huhu..

wah..saga with 63 inside.for sure monster nie..hehehe
ur fren's putra,how much hp it produce bro??
if u know the detail about his engine mods,mind sharing with me??

 

[goo_61t]

detail i dun knw laa..just a low down profile saga laa broo i drive..not so power laa so-so only laa..sedap2 memotong org kata hehehe

 

[owndferra]

stock 63 oredi power maa..so salute satu kat bro..
like mine,satria with stock 67..planning to turboed it..
xbley tahan tgk kete org ade bunyi pecehh..pecehh..
so try laa seek for information here kot2 bley dpt..hehe

 

[goo_61t]

67, hang carik head evo or vr4,piston turbo vr4 or evo mana2 bley nak compression tinggi evo nak rendah vr4,then manifold,turbo,ecu vr4 pun dah ok wiring xyah kaco sgt sbb sama jek,airflow vr4 or evo(nak kene cincang wire sket) injector,resistor,hurm tuh jek laa kot.cost agak tinggi sket compare ngan ko beli hafkat vr4 sbb nak kene beli bende asing2. Tp advantage xyah gi proses endorsement lagi dah. Temeng blet sme sama evo,vr4 67 xde hal. tuh je la kot. Jalan sengkat beli hafkat vr4 barai habes,xpun hafkat evo barai habes block jual brg2 lain salin trus. ding dong turbo siap satuuuuu hahahaha

 

[owndferra]

my fren offer me vr4 engine..dia letak harge 2k..
dia kate plug n play pastu punch jek..
hat yg tue aku blur sket..huhuhu

 

[goo_61t]

x payah punch..ko amik jek vr4 tuh complete x? kalo complete ko amik jek..ko rebore block 67 ko masuk piston vr4 conrod,crankshaft sme sama ko salin jek head pun skalik salin. dah xyah punch2 simpan block vr4 tuh utk masa depan haha