Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="Izso" data-source="post: 1064585370" data-attributes="member: 2429">Wise move. Halfcut coilovers are a gamble. If you get a good one you won't know how long they'll last and where to service. Spend some good money on a decent BC or HWL and you'll have better peace of mind. Sigh. Try handling 140whp first then tell me how you'll want to handle 250bhp. Btw, if you're going to go so high powered, you'll need to worry about a completely new set of things. Torque steer, wheel spin, drive shafts that can take that power, gearbox, etc. Expect to pay through your nose for custom made reinforced parts.And what exactly is "cap ayam" tuned? Is there such a thing? A badly tuned car will probably break something. A poorly tuned car probably will not fully bring out the power of the car. A decent tune would probably be "safe" so nothing blows up. So what's cap ayam?Depends on what you want to do. Top or full overhaul? And if full depends on what you want done? If it's already out, you might as well spend on getting mods done there and then. Taking it out again and again will cost more than necessary. Things like oversized pistons, head skimming, crankshaft, bearings, port and polish, etc. So all depends on what you want done. Cost can range from RM2k to RM9k.Sigh. You really don't get it. VDO is a lot smarter than the ancient MMC. The only good thing about MMC is it's got more aftermarket support in terms of reflashing and all. But why bother with flashing it when VDO can just adapt? Unless you mod over the map limitations, it'll adapt to most NA mods. With everything I did, I kept the VDO until I finally got my hands on a piggyback. Installed it and had it tuned, improvement of only 5-8whp. Meaning the VDO was more than capable of handling all my mods. Why is that bad?Huh... you need mechanical mods more than you need those things. Everything wasn't designed for that sort of power. Oil seals, gaskets and all will have a shorter lifespan. You'll probably have heat issues on hot days too unless you upgrade the whole cooling system. This is for BOT.And don't expect BOT to give you 250bhp. Probably no more than 110-130bhp from complete stock parts with low boost. Properly means you do everything properly. Not half assed. BOT in my personal opinion is half assed. Stock internals and stock everything with a BOT kit is wreckless imho. Personal opinion. Dude, 0.5bar boost will last you 2 weeks. After that you'll want more. Then slowly increase a bit a bit then one day boom... piston decides to take a vacation. Spend another few thousand fixing everything again. Why bother la? Do it right the first time and spend more time enjoying the car, not spending more time in the workshop.</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

2025 Volvo EX90 Wins World Luxury Car Award

Rather than focusing on traditional luxury elements, the EX90 gained attention for its approach to safety...

Choosing a reliable clutch

Hello guys and sifu. I just managed to BOT turbo for my project car. So for now its 80% completed and estimated torque i really don't know, but targeted being around 300whp.

As for title, i really need to choose a...

My X'mas wishlist!!

View attachment 614491
View attachment 614492
View attachment 614493
View attachment 614494

GT sport with TECHART powerkit TA 087S / C3.8

Displacement : 3,824 cc flat-six

power at rpm 283...