- Mar 29, 2006
- 939
- 2
- 1,518
I have 2 chanel mosfet power amplifier now...
I want use tis amp for 2 JBL subwoofer 10`
My question is:
Can i setup this set will give me quality sound?
Bolehtak amplifier ini support utk 2 JBL woofer ini?
I takut amplifier ini akan selalu panas....
If not suitable setup, what specification must i find for setup with 2 this woofer?
Help me please...
Any recomended..?
Features JBL GT100
Stacked 40oz Magnets
Deep-Draw I-Beam Basket
Polypropylene Woofer Cone
Hi-Roll Rubber Surround
Vented Pole Piece
Specifications
Size: 10 inch
Rec. Sealed Box Dims: 0.75 cu.ft.
Rec. Ported Box Dims: 1.75 cu.ft.
Free Air Usage: not recommended
Sensitivity: 90 dB
Frequency Response: 28-500 Hz
Recommended RMS Power: 250W
Peak Power Handling: 1000W
Impedance: 4 ohms
Features ATOMIC MOSFET AMPLIFIER
-4Ohms 1KHz 1%THD= 150Wx2
-4Ohms Bridge 1KHz 1%= 380Wx1
Signal to Noise Ratio= 98dB
(A weighted)
Frequency Response= 10Hz-75KHz
High Pass= 40Hz-240Hz
Sub Boost (at 60Hz)= 6dB
Input Impedance = 10k
Channel Separation= 50
Fuse Rating= 40A
PLEASE REPLY ME FOR HELPING....
Regards
med
I want use tis amp for 2 JBL subwoofer 10`
My question is:
Can i setup this set will give me quality sound?
Bolehtak amplifier ini support utk 2 JBL woofer ini?
I takut amplifier ini akan selalu panas....
If not suitable setup, what specification must i find for setup with 2 this woofer?
Help me please...
Any recomended..?
Features JBL GT100
Stacked 40oz Magnets
Deep-Draw I-Beam Basket
Polypropylene Woofer Cone
Hi-Roll Rubber Surround
Vented Pole Piece
Specifications
Size: 10 inch
Rec. Sealed Box Dims: 0.75 cu.ft.
Rec. Ported Box Dims: 1.75 cu.ft.
Free Air Usage: not recommended
Sensitivity: 90 dB
Frequency Response: 28-500 Hz
Recommended RMS Power: 250W
Peak Power Handling: 1000W
Impedance: 4 ohms
Features ATOMIC MOSFET AMPLIFIER
-4Ohms 1KHz 1%THD= 150Wx2
-4Ohms Bridge 1KHz 1%= 380Wx1
Signal to Noise Ratio= 98dB
(A weighted)
Frequency Response= 10Hz-75KHz
High Pass= 40Hz-240Hz
Sub Boost (at 60Hz)= 6dB
Input Impedance = 10k
Channel Separation= 50
Fuse Rating= 40A
PLEASE REPLY ME FOR HELPING....
Regards
med