B14 owner club!!

[Northiswara]

to all Sentra B14!!

come and share your car view in this topic.

i own a B14 with light engine modification and give me good response. so far very happy for it.

 

[melon]

hihi,

me too my ride is b14 manual... well at the moment the mod i've done include the 1.6" exhaust piping front extractor 4-2-1 and drop in K&N also plug cable NGK. well with this i often touch 180kmh and up till speed cut me off boring... haha

you?

 

[Northiswara]

my B14 was bought 2nd hand.

i install VS, grounding cable, send my B14 to tan chong for tuning package which includes change fuel filter, spark plug and air filter. they also clean my throttle body and reset my ECU to factory setting. i using original header with a bullet(cost me Rm140) and a sport muffler that has S pipe in it(cost me Rm250). my existing exhaust rosak already when i bought the car over. then i tune the ignition timing to be more advance which give better power!! my auto car easily reach 140km/h but then got a turtle car blocking me in front so i have to slow down.

since u have 4-2-1 i think u can tune the ignition timing higher and it wont easily knocking because your engine runs cooler with 4-2-1. i heard 4-2-1 for B14 cost RM200, how much you installed yours?

bro, how heavy is your fuel consumption?

 

[Northiswara]

melon,

got any pic to show of your engine?

 

[Northiswara]

milon,

u got install iridium plug at ur b14??
plan to try it.
but i dont know is the effect good or not??

 

[banzai]

Northiswara : how much does it cost to send your b14 for Tan Chong servicing? i want to do so too, as my cold idling is very erratic. Which branch did you sent your car to?

my b14 is still very much stock, and will send it to UR for some strengthening bar as i find that b14 tend to roll a lot.

 

[Northiswara]

banzai,
i think u can install grounding cable as i found my stock grounding cable is rusting.

i send to :

TCEAS Bukit Mertajam

No. No.21, 23 & 25, Lorong Perda Timur 2,
Bandar Perda,
14000 Bukit Mertajam
Penang

Tel:
(604) 538 0891 / 1061

u can check the service center at nissan.com.my

for engine oil semi synt castrol cost me about RM80,
oil filter if not mistaken RM20+
labour is RM20+ like that.
i can say the price is reasonable.

tuning package is about Rm200+ which include throttle cleaning, fuel filter change, air filter change, spark plug change, timing setup, sensor checkup, ECU reset to default setting.

auto gear oil change is RM150-170 and labour is RM50.

 

[Northiswara]

banzai, wat do u mean by roll a lot?
maybe you need to change your tyre to michellin then you willfind your car stick to the road during raining and dry weather. then u pump nitrogen into your tyre, u can feel the difference and sure it is great! this is from my previous experience. i have a iswara that likes to drift a bit during raining day, after change to michellin tyre, i can even play emergency brake during raining and i also can turn at faster speed during raining. there is a difference.

 

[banzai]

Great! Thanx for the info.Yeah, the price looks reasonable to me. Will visit one of TC branch here very soon. My regular mechanic here do not have dedicated diagnostic tools for Nissan as he is more to Toyota.

oh, the rolling part, the tyres i'm using are fine, they stick to the road and i've no complain. Just that i want to add fender and lower arm bar, and rear boot 2 point bar to strengthen the chassis.I wonder if there's Nismo anti-roll bar for b14 here in M'sia. From what I read, those performance ARB can only found in Western countries produced by Stillen or Progress. My chopshop friend will be coming back from Japan and hopefully he'll be able to find aftermarket suspension for b14 i asked for.

btw, just to out of topic a bit, I have a Nismo rear muffler for NA for sale. At first thought of using it, but kena nagging (if you know what I mean). so, decided to sell it off. will take a picture of it one of these days.

 

[melon]

hi... my 4-2-1 cost me about rm250 new.... without installation.

hey bro i got 1 used front strut bar taken out from japan half cut interested?

as for the brake hmm i think api brand can provide a very good braking will cost about RM150 front and RM150 back really good oh can stop easily.

 

[Northiswara]

as for the brake hmm i think api brand can provide a very good braking will cost about RM150 front and RM150 back really good oh can stop easily. <- api brand? never heard of this brand. hehe........ i know brembo.

anyone use platinum or iridium spark plug at their B14?? please comment. because i plan to install it.

 

[banzai]

Wow... for tat price...perhaps u can try Bendix Metal King.

 

[melon]

well the api brake is reliable lo cause i tried bendix too... haha
but provided your rear brake is not drum.

well i've tried iridium denso not bad also can try NGK iridium,,,

platinum and iridium the different is platinium is able to clear carbon build up only i dont think is good for injection car lo...(correct me if i'm wrong.)

 

[SentraGTS]

hello everyone here..
i also driving a b14 but it is a GTS la..
wat i modified r almost same like u all..
i also tried iridium denso, not bad lo..

regarding the brake oh, i use metal king last time.
i think ok lo but still not enough 4 me la..
now i had change to skyline 4 pot front and 2 pot rear..
it is totally different lo... i can say great....

then after putting so much money into the GA16..
i still dont feel enough lo..
then now i just put in SR16 neo-vvl..
damn powerful...

do u want the 4-2-1 extrator???
i can sell it to u in the lower price but i location is at kl la..

since i had change the engine, any1 looking 4 b14 stuff i may can sell it to u all. let me know la.....

 

[SentraGTS]

if u want to view my previos look of m car, u can check out this:-

http://www.zerotohundred.com/newforums/nissan/126102-b14-nissan-sentra-make-up-2.html

hope can seela.. cheers......!!:_:

 

[jeyaraj]

hi can be new member just got my b14..need to look for the bumper wif sport light le can anyone help..my hp no. 0165418798

 

[Northiswara]

SentraGTS,

your car COOL man!
how much u spent on the SR16 neo-vvl engine?

just curious about your fuel consumtion, mind to share?

thanks.........

 

[SentraGTS]

Northiswara,

i think almost rm10k kua ++ kua...
a lot money lah....

about the fuel consumtion, a bit makan minyak..
i can say full tank is less than previos engine 100km lo...

 

[Northiswara]

rm10k kua ++ kua... <- wah seh brother.......
better u turbo charge the GA16DE and give u more than 200bhp larr.......

full tank is 100km!! my auto B14 stock engine with exhaust modifcation only, extractor still stick with the stock standard can run about 500km withh full tank.
yours 100KM only??

i heard B16A engine running on city drive is not so heavy fuel consumption rite?? unless the VTEC on then it is a thirsty engine.
if you drive steadily with your SR16VE without activate the VVL i think the fc is ok larr..............

 

[banzai]

i think what he meant was last time stock engine can run (for example : 500km), but now with SR16VE can run 400km. a hundred km lesser.

sentraGTS : got any pic of ur engine bay? it's a rare sight...:)

 

[melon]

hi bro banzai regarding you planning to send you car for Ultra Racing to tune up... have you done it yet?

I'm very interested to know cause i'm too find my car need to be more stable looking for the rear anti roll bar for my b14... if you are sending your car to UR plaese ask them to do the rear antiroll bar too then if front also need to increase the diameter ask them to do it too this will very much help our b14 to go faster at corner... please update!!

Do you have picture for your muffler? is it straight flow? fireball type or how please upload picture.


Hi bro SentraGTS, did you do up your bodykit? very very nice. i'm looking for skirting and rear skirting also front bumper too... got anyway out for me? also now that you mention you have change your engine to sr16 how do you find it? also very interested regarding your mod to your brake... can i have more detail on the brake 4port and 2port thing... from what car and the pcd for your wheels do you need to up size your rim? please reply very interested to up grade the brake.

Thanks bro very happy to be here... haha

 

[banzai]

melon... welcome welcome..

i've yet to visit UR for strengthening work... wkend alwiz filled up..:( UR have rear ARB for B13, so i'm not sure if it fits B14. they have fender and front strut bar for B14 though.

below are the pictures of the nismo-calsonic exhaust. it's s-flow. the output has a Nissan Sports Muffler exhaust tip covering the original output, so it's not as big as we see in the picture.

http://img.photobucket.com/albums/v303/cmchang/nismo.jpg
http://img.photobucket.com/albums/v303/cmchang/nismo2.jpg
http://img.photobucket.com/albums/v303/cmchang/nismo1.jpg

 

[SentraGTS]

Northiswara
ya loh now thinking is also quite expensive,
but now na got not much problem than a turbo lo...
register also easier..
i like the turning sound when in the high rev which like the vtec, may be more ganas than vtec..
last time my fuel consumtion was 420km, but now 310km lo..(in full tank and now tank didnt change, just change the fuel pump of sr16)

banzai
pic will up load soon caz havent took pic yet..

melon
my body part is original from tan chong.. this model is limited editional..
so i think u cant find any of this body part at tan chong anymore..
in this pic i just add the Blitz cannag which at the from bumper, side skirt change to thick that look more lower to the ground, then rear skirt used honda stream rear skirt and modify to put it on. spoiler is original..
now i using all the sr16 body part la..(front only)
i may selling the original side skrt and rear skirt since i not using anymore, but the front bumper and sarong i may not sell caz both r limited editional..
i keep for spare part la..

s16 half cut can find in any of the chop shop..
if u look to the motor trader, most of the chop shop mayhave this engine..
dont play play, this engine can cost u RM6500 and above and may or may not have the body part and dashboard..

regarding the brake, i just ask my mechanic to find a set of this brakes with 'nissan' word on the calipper..
then they just modify from 5 lugs to 4 lugs to fit my car..
spacer needed and enlarge the sport rim is must..

 

[n_chun21]

i also driving nissan sentra b14 (Auto) always in kepong area
my car is silver colour with custom make bumber, rear side skirt and front part with gt wing.........

last time when i all stock just got 15" sportrim my car can hit 210km/h but now i think bzos my gearbox got problem now just hit 150km/h... and my fc is so high leh RM30 can go 140 to 160 kilometer... depend the road..
i already change:...
4-2-1 with 1.6 piping , twisted bullet and titanium straight flow muffler...
open pod with CAI, and 205/45/r16 sportrim
front bar, and rear bar...
2 voltage stabilizer
denso iridium plug...
GEAR oil cooler...
after i change this all thing my car wheel will spin when change gear 1 to gear 2 and my gear 2 can hit 13+km/h after tat other gear bye bye... no used bzos i just can touch 150km/h.. u all know wat is the problem is it the gearbox problem? Hope can know about it thanx...

 

[SentraGTS]

n chun21
hi bro, u have the same color as my car la..kekeke!!!
auto also can spin on 1st and 2nd gear... not bad ah...
ur fc is really high, look like not makan minyak but minum minyak kao kao...

reagarding ur problem ah...
is the speed on 150km/h like speed cut or it is hang on that speed??
i can ask my mechanic about ur probelm then i let u know la..
or may be some1 here may know then pls share...

anyway welcome and cheers
hope to see ur car soon...