.: Exhaust Modification Corner :.

[arthurtan199]

hey hey, im drivin a 1.6 wira aeroback, erm feel like changing my exhaust, well i would liek somethin which i can feel the air, and the sound of the air, BUT NOT Noises. u knw those really loud ones? i dont want that. open for suggestion! =D

 

[arthurtan199]

anyone knows where can u get exhaust modification in good price? state the location please =) in Wilayah yea.

 

[mydaus]

anyone knows where can u get exhaust modification in good price? state the location please =) in Wilayah yea.

try call this person. K.Weng - 0125629713 / 0163462636

 

[Raven.]

kweng, just wanna ask, does HKS super dragger 2.3inlet more silent than tanabe (racing medalion) 2.0inlet?

Bump: kweng, just wanna ask, does HKS super dragger 2.3inlet more silent than tanabe (racing medalion) 2.0inlet?

 

[Satria SE]

Hi wana upgrade my Satria SE 1.5(M) piping ere any recomendation...nt to noisy...with better response

 

[alvin2002_my]

bro, would like to check with u..
im driving iswara 1.5 M.
currently im using 4-2-1, others was standard setting.
kindly advise wat can be mod for better performance but try to minimize the loudness of the exhaust sound.

 

[jeffayn]

if u just mod only extrator and u think its too loud, is there something else is wrong ? because I think the extractor alone doenst make that much noise...

or you want further to reduce the exhaust noise?

 

[Raven.]

well i have one S flow perfect for satria, its imitation like mugen... quite sporty sound but very silent.. ^^ if you want you can pm me ^^

Bump: well i have one S flow perfect for satria, its imitation like mugen... quite sporty sound but very silent.. ^^ if you want you can pm me ^^

Bump: alvin, i believe your standard muffler sponge was burned....
thats why the sound is like that. or maybe there is a leaking with your piping... ^^
just my experience ^^ if got faulty don blame me ~

Bump: alvin, i believe your standard muffler sponge was burned....
thats why the sound is like that. or maybe there is a leaking with your piping... ^^
just my experience ^^ if got faulty don blame me ~

Bump: alvin, i believe your standard muffler sponge was burned....
thats why the sound is like that. or maybe there is a leaking with your piping... ^^
just my experience ^^ if got faulty don blame me ~

Bump: alvin, i believe your standard muffler sponge was burned....
thats why the sound is like that. or maybe there is a leaking with your piping... ^^
just my experience ^^ if got faulty don blame me ~

Bump: alvin, i believe your standard muffler sponge was burned....
thats why the sound is like that. or maybe there is a leaking with your piping... ^^
just my experience ^^ if got faulty don blame me ~

 

[alvin2002_my]

if u just mod only extrator and u think its too loud, is there something else is wrong ? because I think the extractor alone doenst make that much noise...

or you want further to reduce the exhaust noise?

my exhaust now quite silent.
i know tat if i change muffler sure will be louder so i hope can change to a bit silent punya

 

[rex79gt]

i hav queries for exhaust pro answer me o comment me

i'm driving a satria neo 1.6 auto
recently i juz changed my exhaust system
4-2-1 extractor, 2 stainless steel mid box, HKS super drager 2'' inlet/4" outlet semi S-flow
piping wif 1.7"
but i stil not satisfy wif the power
the 4-2-1 is connected like "1" & "4", then "2" & "3" (if u get what i mean)
what if i switch the piping of extractor to "1" & "3" , then "2" & "4"?
can i do it this way to gain more power?

appreciate for experts' replies:wavey:
thanx

Bump: i hav queries for exhaust pro answer me o comment me

i'm driving a satria neo 1.6 auto
recently i juz changed my exhaust system
4-2-1 extractor, 2 stainless steel mid box, HKS super drager 2'' inlet/4" outlet semi S-flow
piping wif 1.7"
but i stil not satisfy wif the power
the 4-2-1 is connected like "1" & "4", then "2" & "3" (if u get what i mean)
what if i switch the piping of extractor to "1" & "3" , then "2" & "4"?
can i do it this way to gain more power?

appreciate for experts' replies:wavey:
thanx

 

[kweng84]

i hav queries for exhaust pro answer me o comment me

i'm driving a satria neo 1.6 auto
recently i juz changed my exhaust system
4-2-1 extractor, 2 stainless steel mid box, HKS super drager 2'' inlet/4" outlet semi S-flow
piping wif 1.7"
but i stil not satisfy wif the power
the 4-2-1 is connected like "1" & "4", then "2" & "3" (if u get what i mean)
what if i switch the piping of extractor to "1" & "3" , then "2" & "4"?
can i do it this way to gain more power?

appreciate for experts' replies:wavey:
thanx

Bump: i hav queries for exhaust pro answer me o comment me

i'm driving a satria neo 1.6 auto
recently i juz changed my exhaust system
4-2-1 extractor, 2 stainless steel mid box, HKS super drager 2'' inlet/4" outlet semi S-flow
piping wif 1.7"
but i stil not satisfy wif the power
the 4-2-1 is connected like "1" & "4", then "2" & "3" (if u get what i mean)
what if i switch the piping of extractor to "1" & "3" , then "2" & "4"?
can i do it this way to gain more power?

appreciate for experts' replies:wavey:
thanx

Hi bro, im not sure if my opinion is expert or not, but i'll try.

Refer to this MYVI 4-2-1 (S.Steel):

U can see that 4-1,2-3 design is most common. Manifold pipes sized 1.6". So, extractor is not really the root cause of power loss. Well, I will not say power loss the right word, as i can see that your setup is okay BUT power will be much felt at higher rpm about 5k-6krpm (FC is affected :) ). HKS SUPER DRAGER Semi S-FLOW?? Provide me a picture. Semi S-Flow like MUGEN TWIN LOOP style? If yes, then fully understand that you wanted back your pick up power. AUTO tranny has problem with keeping the right pressure.

First, Get a good S-FLOW muffler. AFAIK, 3 pipes designed inside of the SFLOW is the best to keep delta-pressure (pick up power retained). Another point i felt that needs to be improved is the center box. Is that straight flow? Any filters? U need filter to keep pressure for pick up. Piping size, if 1.7" diameter, alright for low end torque purpose..i would say JUST NICE!

Anymore hesitations, call me then.

Thanks & Best Regards,
K.Weng
0125629713
0163462636

MSN: [email protected]

 

[JeN1707]

driving Wira 1.3 M sedan now..T
hinking of changing my exhaust..
any good suggestions for me ??
currently using fully original exhaust..
I'm on low budget..
Any nice n cheap stuff for me ??
BUMP !!

Bump: driving Wira 1.3 M sedan now..T
hinking of changing my exhaust..
any good suggestions for me ??
currently using fully original exhaust..
I'm on low budget..
Any nice n cheap stuff for me ??
BUMP !!

 

[rex79gt]

Hi bro, im not sure if my opinion is expert or not, but i'll try.

Refer to this MYVI 4-2-1 (S.Steel):

U can see that 4-1,2-3 design is most common. Manifold pipes sized 1.6". So, extractor is not really the root cause of power loss. Well, I will not say power loss the right word, as i can see that your setup is okay BUT power will be much felt at higher rpm about 5k-6krpm (FC is affected :) ). HKS SUPER DRAGER Semi S-FLOW?? Provide me a picture. Semi S-Flow like MUGEN TWIN LOOP style? If yes, then fully understand that you wanted back your pick up power. AUTO tranny has problem with keeping the right pressure.

First, Get a good S-FLOW muffler. AFAIK, 3 pipes designed inside of the SFLOW is the best to keep delta-pressure (pick up power retained). Another point i felt that needs to be improved is the center box. Is that straight flow? Any filters? U need filter to keep pressure for pick up. Piping size, if 1.7" diameter, alright for low end torque purpose..i would say JUST NICE!

Anymore hesitations, call me then.

Thanks & Best Regards,
K.Weng
0125629713
0163462636

MSN: [email protected]

http://203.223.133.166/images/74/7493714590.jpg
this is the exhaust i'm using now
any comment?
inside not straight flow n got sth "block" in the center, so i think this is S flow rite?

 

[kweng84]

http://203.223.133.166/images/74/7493714590.jpg
this is the exhaust i'm using now
any comment?
inside not straight flow n got sth "block" in the center, so i think this is S flow rite?

Not S-Flow. AFAIK, HKS SUPER DRAGER isn't s-flow at all. The design goes like this becoz it is meant to create bassy sound. Besides, it is too big for your car. What is the inlet size? 2.5"? I saw the outlet of the muffler is roughly 2.5" (i dont mean the tailpipe). So, basically your car losing pressure. Time for you to get a proper s-flow model muffler bro and center box (make sure u have extra filter inside). That's my 2 cents.

 

[rex79gt]

these r my pics for exhaust

inlet 2" outlet 4"

Bump: these r my pics for exhaust

inlet 2" outlet 4"

 

[kweng84]

Bro, where u bought it? Is that original? Sorry becoz' the last picture's welding isn't Ti-G coz' as i know japanese muffler's welding isn't like that. Nvm bro, i suggest you come my shop and let me see clearer when you free. Anytime. Call me. K.Weng 0125629713

Bump: Bro, where u bought it? Is that original? Sorry becoz' the last picture's welding isn't Ti-G coz' as i know japanese muffler's welding isn't like that. Nvm bro, i suggest you come my shop and let me see clearer when you free. Anytime. Call me. K.Weng 0125629713

 

[ham_m2]

what type of exhaust is suitable for my wira 1.8EXi auto?currently using original exhaust system...

 

[achmedrauff]

Bro, where u bought it? Is that original? Sorry becoz' the last picture's welding isn't Ti-G coz' as i know japanese muffler's welding isn't like that. Nvm bro, i suggest you come my shop and let me see clearer when you free. Anytime. Call me. K.Weng 0125629713

Bump: Bro, where u bought it? Is that original? Sorry becoz' the last picture's welding isn't Ti-G coz' as i know japanese muffler's welding isn't like that. Nvm bro, i suggest you come my shop and let me see clearer when you free. Anytime. Call me. K.Weng 0125629713

True true....the welding on that one is no where near the Japs standard welding..... I hope you did not get conned.

 

[kweng84]

what type of exhaust is suitable for my wira 1.8EXi auto?currently using original exhaust system...

Hi bro, WIRA 1.8 Auto. Let me get some info first.

Where you usually drive in? City or Highway?
Which one is your main concern... FC?POWER?SOUND?
Lastly, the way u drive the car... u like to go high revving (more than 4k-5k often?)

Sorry to ask u so many things... I just wanna know why u wanna modify exhaust before i can give my humble suggestion to u.. :)

 

[ham_m2]

Hi bro, WIRA 1.8 Auto. Let me get some info first.

Where you usually drive in? City or Highway?
Which one is your main concern... FC?POWER?SOUND?
Lastly, the way u drive the car... u like to go high revving (more than 4k-5k often?)

Sorry to ask u so many things... I just wanna know why u wanna modify exhaust before i can give my humble suggestion to u.. :)

mmmhhh...i usually drive in city n a bit of highway...
im concern bout the FC and Sound...sound like the Satria R3
i dont really like high revving...jus mainly bout 3-4k...sumtimes only about 5-6k...
so what u suggest?