DENSO Iridium Power With Gapping + Free Gift Promotion!

[ericwong]

hi all members..
got the plugs from soonhong...
really not bad for this iridium plug..
ahha..somore got the hp strip + the gapping..

thanks...

 

[soonhongauto]

Hi Eric

Thank you for collecting Iridium order from me today.
Hope you enjoy Iridium with Gapping.

To All

Pls contact me for Iridium with Gapping Promtion (Free limited Iridium Hp Strap).

Vincent
016 917 8669

 

[evo5229]

bro for waja campro engine how much

 

[soonhongauto]

Hi Evo5229

PM replied.

 

[osiris_putra]

for wira 1.3 izit IK16 or IK20?

 

[nd_summer]

pls PM me the $ for P-Waja 1.6 (4G18) n location

 

[jiash87]

Denso got spark plugs for Proton Savvy?

 

[soonhongauto]

Hi All

PM replied. Pls revert interest.

 

[popout]

promotion until what time?? i still waiting my car finish engine trasplant

 

[soonhongauto]

Promotion will end whilst stock last!
Let me know when you finish engine transplant.

 

[popout]

sure!! thank you

 

[ryuichi]

Bro,
I agree that less gap will result on more concentrated firing.....
But from what i can gather from Denso website is that IK16 standard gap is 1.1mm where IK20 standard gap is already 0.8mm
So, if I buy IK16 got free strap n gapping.... and if I buy IK20 got only free strap n no gapping cause it's already 0.8mm gap...is it correct

 

[soonhongauto]

Bro,
I agree that less gap will result on more concentrated firing.....
But from what i can gather from Denso website is that IK16 standard gap is 1.1mm where IK20 standard gap is already 0.8mm
So, if I buy IK16 got free strap n gapping.... and if I buy IK20 got only free strap n no gapping cause it's already 0.8mm gap...is it correct

Hi All

Original gapping of ALL Iridium IK/W/Q/T16/20 from DENSO @ 1.1mm

To attain concentrated plug firing, serious tuners, car enthusiasts and street racers will adjust the gap of Iridium to 0.8mm to attain higher performance.

To Ryuichi

You can visit to http://www.globaldenso.com/plug for more info.

 

[ryuichi]

Hi All

Original gapping of ALL Iridium IK/W/Q/T16/20 from DENSO @ 1.1mm

To attain concentrated plug firing, serious tuners, car enthusiasts and street racers will adjust the gap of Iridium to 0.8mm to attain higher performance.

To Ryuichi

You can visit to http://www.globaldenso.com/plug for more info.

To Soonhongauto,

Yeah, i had visited the website u gave.....
Maybe u can probe further to http://www.globaldenso.com/PLUG/search/malaysia/automobile.html n check out for Corolla Ae111 which Denso recommend IK20 which have 0.8mm gap :hmmmm:

 

[soonhongauto]

Ruichi

I had installed many sets of IK16/20 with gapping to 0.8mm to Altis, Vios and Myvi even AE101. So far the review is good.
Original specs for AE101 => Gap 1.1mm (IK16/20)

If you want more performance, gapping to 0.8mm will further enhance the acceleration. DENSO website only shows general information on plug specification for user knowledge.

Why not you give a try on my Iridium Gapping to feel the difference?

 

[ryuichi]

Ruichi

I had installed many sets of IK16/20 with gapping to 0.8mm to Altis, Vios and Myvi even AE101. So far the review is good.
Original specs for AE101 => Gap 1.1mm (IK16/20)

If you want more performance, gapping to 0.8mm will further enhance the acceleration. DENSO website only shows general information on plug specification for user knowledge.

Why not you give a try on my Iridium Gapping to feel the difference?

Soonhongauto,
I'd been using IK20 for my 20V for the pass 2 years already...I know the power difference between normal n iridium plug.
I'd even tried IK22 cause 20v is a very hot engine...but felt that IK20 is enough for 20V....
I saw in denso website, it stated that IK20 standard gapping is already 0.8mm n IK16 is 1.1mm gapping....
So, thought of just buy IK20 n no need to do gapping to 0.8mm since standard gap for IK20 is 0.8mm ma
That's why was curious n ask u lo.....not that wanna kacau ur thread or ur sales le bro....

 

[dannyyong]

hi.. all members..
i have test the iridium plug a few weeks..
the performance really not bad..
really got inrease my housepower...
thx soonhongauto..

 

[soonhongauto]

Soonhongauto,
I'd been using IK20 for my 20V for the pass 2 years already...I know the power difference between normal n iridium plug.
I'd even tried IK22 cause 20v is a very hot engine...but felt that IK20 is enough for 20V....
I saw in denso website, it stated that IK20 standard gapping is already 0.8mm n IK16 is 1.1mm gapping....
So, thought of just buy IK20 n no need to do gapping to 0.8mm since standard gap for IK20 is 0.8mm ma
That's why was curious n ask u lo.....not that wanna kacau ur thread or ur sales le bro....

Hi Ryuchi

Pls refer to this link and you will understand what I say.
http://www.globaldenso.com/PLUG/catalog/asia/pdf/P016.pdf

Original IK16/20 from DENSO Plant will not be gapped at 0.8mm.
You can even check by yourself IK16/20 (Brand new) by using ruler or other measurement tool (from center tip to ground electrode).
Then, you will know what I mean. Original gap for IK/Q/W16/20 @1.1mm.

On the website you read from DENSO SPARK PLUGS
Though some IK16/20 is mentioned that gap at 0.8/0.9/1.1 is suitable for some engine models, original IK16/20 is not gapped at 0.8/0.9.

You have to request mechanics to perform gapping for you. It's incorrect to believe that DENSO Plant will pre-gap for you. As they make Iridium with general application to fit most vehicles even not gap at desired gap to achieve more performance.

Most vehicles can use IK16/20 at gapping @ 1.1mm. Yet, if use 0.8mm, more horsepower can be gained.

 

[e819]

for gsr what should i use?
where 2 collect the stuff,
pls pm me, thanx

 

[soonhongauto]

IK20 - GSR
PM replied.