NewBie to Perdana V6

[vr2turbo]

No lah! just talking about safety. Just like raising the hood according to some is not safe, because not lock level to car body. If raised too high in case of accident can snap off and enter car through windscreen...

 

[DanzEterna]

Paid around 200 after selling off mine.. got it for 450..
But the hood doesnt give any sort of protection if Im not mistaken.. worst come to pecah like bumper.. haha
Wei jangan blm anything say accident adi haha.. me slow driver... Pandu cermat asalkan selamat..

make sure u get a hood pin/lock installed

 

[spawn_net]

make sure u get a hood pin/lock installed

Hi Danz.. thanks man..
Whats a hood pin/lock?
Currently mine has a double lock.. means tat have pull it twice then can open.. not ez to open as well...

The Piping for the manual.. 2'3 or 2'5 inch? front to back? Extractors need to change?

 

[vr2turbo]

Like This....

 

[spawn_net]

Thanks dude.. saya cari nanti..

 

[kurt_629]

curious, those bonnet with pin lock stuff,

how does the owner actually opens them?
the usual method, open door and pull the handle?

or just directly on the bonnet pin?
if bonnet pin, won't it cause theft?

 

[DanzEterna]

kurt,
get out from car, unlock hood pin then pull the hood latch.

 

[kurt_629]

kurt,
get out from car, unlock hood pin then pull the hood latch.

oh, that mean people can freely remove the hood pin and access to the engine..
dangerous isn't it?

 

[spawn_net]

I think this is an additional to the standard bonnet hook lock, (just in case the hook don't sit well) so that on high speed bonnet tak terbang..

've use grounding cables and voltage stabilizer unit for my previous waja and all.. doesn't it really effect performance of just a gimmick..
My Car do have amplifiers and upgraded sound system.

 

[kurt_629]

I think this is an additional to the standard bonnet hook lock, (just in case the hook don't sit well) so that on high speed bonnet tak terbang..

've use grounding cables and voltage stabilizer unit for my previous waja and all.. doesn't it really effect performance of just a gimmick..
My Car do have amplifiers and upgraded sound system.

totally agreed.

voltage stabilizer, its more like an indicator of my battery life..
grounding cables, since its inexpensive, i bought it as a deco to the engine..

 

[vr2turbo]

I think this is an additional to the standard bonnet hook lock, (just in case the hook don't sit well) so that on high speed bonnet tak terbang..

've use grounding cables and voltage stabilizer unit for my previous waja and all.. doesn't it really effect performance of just a gimmick..
My Car do have amplifiers and upgraded sound system.

My VS did improve my sound system especially the bass.....

 

[spawn_net]

Guys...

Since now my ride is Manual..
Standard Extractors need to go right? so replace them with good extractors....
SO Cap Ayam or Hotbits?? or more important the down pipe... many said tats the most important..

Currently am using two sport centre box.. standard muffler.. original piping..

 

[kurt_629]

Guys...

Since now my ride is Manual..
Standard Extractors need to go right? so replace them with good extractors....
SO Cap Ayam or Hotbits?? or more important the down pipe... many said tats the most important..

Currently am using two sport centre box.. standard muffler.. original piping..

wow.. changing extractor now?

cool.. but cannot reuse the standard extractor? what is the concern?
isn't it the same, regardless of auto or manual

 

[spawn_net]

Normally for Manual better upgrade extractors...
Pick up power sikit.. so just wondering to invest in cap ayam or hotbits..

 

[kurt_629]

Normally for Manual better upgrade extractors...
Pick up power sikit.. so just wondering to invest in cap ayam or hotbits..

seem like you hungry for power..

while doing the upgrade of extractors, can consider to thermal wrap it?
proclaim to do good.
then add cold air into the engine, lower temperature always encourage responsiveness.

finally an aftermarket ecu.. power

 

[spawn_net]

Yes.. yup... sure Ecu.. haha fren selling emanage 750.. told hold it on for me... haha

 

[vr2turbo]

seem like you hungry for power..

while doing the upgrade of extractors, can consider to thermal wrap it?
proclaim to do good.
then add cold air into the engine, lower temperature always encourage responsiveness.

finally an aftermarket ecu.. power

Hungry for power, plonk in 6A12TT loh......hahhahhahahha

 

[spawn_net]

No budget la bro.. haha Already my wife eyes almost popped out telling her the price of my Gbx.. haha
Yeah that's really the goal... just found sm1 selling at TT for 4500 dam cun the engine looked.. next time c la who wanna swap engine.. since mine is manual adi with Eterna..

 

[kurt_629]

No budget la bro.. haha Already my wife eyes almost popped out telling her the price of my Gbx.. haha
Yeah that's really the goal... just found sm1 selling at TT for 4500 dam cun the engine looked.. next time c la who wanna swap engine.. since mine is manual adi with Eterna..

actually, is it possible for a 6A12, to insert the TT piping?
i saw someone selling the tt parts, was wondering if it's actually possible.

 

[spawn_net]

TT the pipe size is 3" if not mistaken.. for NA its too much.. based on my reading in other forums for NA manual best size is 2'3" size..