Soundproof Your Car - DIY and non DIY

Status
Not open for further replies.
Interior and Cockpit

Soundproof Your Car - DIY and non DIY

I am driving altis gen 10. please PM me what material to use and prices
1st stage, 4 doors, n boot
2nd stange floor and roof and rear speaker deck board
3rd stage front fender. ( noise plug suitable for what car?
 
I am driving altis gen 10. please PM me what material to use and prices
1st stage, 4 doors, n boot
4 doors how many layers?
My recomended way : 2 x Propad, 2 x Suppression Pad and 4 x Flex Mat for doors.
Boot ah...Use 2 x Flex Mat on rear fenders will do.

2nd stange floor and roof and rear speaker deck board
Rear Speaker deck board also need to do ah? If want then use Flex Mat...others not suitable for that area.
Floor use Dampening Mat and Noise ABsorption Mat.

3rd stage front fender. ( noise plug suitable for what car?)
Front fender use 1 x Suppression Pad and Noise Plug. This Noise Plug suitable for all cars except Waja. You might also need the insulflex, which I do not have.

:)
 
the noise plug can b bend? what material is it?
how about the roof part?
 
the noise plug can b bend? what material is it?
how about the roof part?

Yes, the noise plug can be bent and squeeze... It is made of hybrid (open cell and close cell mix) for 20mm and Open Cell for 10mm. Total thickness is 30mm. No glue required and can fit it without problem and it will not drop off....

Roof? You may buy insulflex or Superlon 10mm will do.... add on Propad/Suppression Pad to dampen the vibration.

:)
 
BUMP..!! :biggrin:

:itsme: long time no see...

Eh.... long time didn't buy also.......

Jangan kacau thread aku la~~ :biggrin:

Myvi tu bila nak modify...?

---------- Post added at 01:02 AM ---------- 6 hour anti-bump limit - Previous post was at 12:22 AM ----------

helo. what do i need for honda city door? and how much?

Bro Is,
I PM you already.... :biggrin:
 
Eh.... long time didn't buy also.......

Jangan kacau thread aku la~~ :biggrin:

Myvi tu bila nak modify...?

---------- Post added at 01:02 AM ---------- 6 hour anti-bump limit - Previous post was at 12:22 AM ----------

:laugh: :laugh: :laugh:
myvi nnti dl la..

nway, ugpm.. :biggrin:
 
please quote/pm me price for doing fender with noise plug n propad n superloN (i will bring myself since u dun have it). where is ur location? Penang can do? how long does it take?
 
please quote/pm me price for doing fender with noise plug n propad n superloN (i will bring myself since u dun have it). where is ur location? Penang can do? how long does it take?

Sorry, I do not provide installation..... And I am not in penang. I am in Selangor.
Sorry....
 
i thought u can provide installation or recommend to a shop?
 
BootBoard.jpg

The board that covers your car boot area. I'm using open-cell foam on the board.

This is what I would advice some of the drivers to try as well. You can use Insulfex or SuperLon, can opt for the 10mm thickness as well. But if can, try to avoid those that DO NOT come with self-adhesive. Yes, the price is cheap... But think of the smell and pain you have to go through for week while driving the car. If you can reach your destination fast enough, then never mind la... If you nasib malang stuck in the jam... I think you will get high by the time you reach your destination. :lol:

...Anyway, the smell of the glue is not good...Even for a week...Not like we are already breath in all those pure oxygen from the surrounding.
 
Hi, please pm me best price for Honda City '09 for four doors and fenders. For doors, use is for ICE. while for fenders, its for reducing tyre sound. Thanks
 
Status
Not open for further replies.

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom