Urgent!! Need help any reliable workshop in jb

[DanzEterna]

But now the workshop said is inside the gearbox part broken so is hard to find replacement.

u mean the bearings?

---------- Post added at 02:23 PM ---------- 6 hour anti-bump limit - Previous post was at 02:23 PM ----------

for knowledge purposes, what is DS?

driveshaft

 

[wsonny]

Yup, bearing...

 

[vr2turbo]

Yup, bearing...

Then have to take gear box out, machine that bearing area then fit new bearing.
My 4G63 bearing broke before and repaired that way, if not need new gearbox....

 

[wsonny]

Oh like tat shit already lor.....

 

[DanzEterna]

Yup, bearing...

if its the bearing then u bang balls edi hehe
happened to me once, because of bearing kong I had to change the whole gearbox internals to evo ones. alternatively u could order the bearings from the US.

try looking for MINES 998, he ordered before.

 

[vr2turbo]

if its the bearing then u bang balls edi hehe
happened to me once, because of bearing kong I had to change the whole gearbox internals to evo ones. alternatively u could order the bearings from the US.

try looking for MINES 998, he ordered before.

Local cannot find the bearings?

 

[wsonny]

Oh NO!!!!!

 

[DanzEterna]

not available locally.....last time not at all, now not sure...

 

[vr2turbo]

not available locally.....last time not at all, now not sure...

Mine was the one driving the DS. Bearing Damaged and wore the GB casing too. Mechanic remove GB send for machining and replace new bearings....

 

[wsonny]

The bill come out 450 for the left hand DS.... Damn shit

 

[DanzEterna]

wah so expensive. the short or long one?
short one rm150 only got warranty summore. workmanship bout rm50+-

---------- Post added at 11:06 AM ---------- 6 hour anti-bump limit - Previous post was at 11:06 AM ----------

btw are u using std springs, sports or adjustable suspension?

 

[wsonny]

The short one, some more they use evo DS wor. They can't find the part at kl area. I also feel I been chopped by this workshop. Anyway this workshop is the same workshop I do my Beemer. So expected the workmanship will charge higher.

My car just been lower by sport spring only. Any recommend workshop in cheras area?

 

[DanzEterna]

the short one can use new pv6 DS costs rm150 only.
suggest not to use sport spring the last time I used it had to change my DS twice in 6 mths & 5 lower arms, tried Taiwan, china, recond, halfcut all kong. once upgrade to adjustable suspension using Taiwan lowers arm for more than 3 yrs without any problem.

 

[wsonny]

Danzeterna, now my radiator water very oily. Is this normal?

 

[vr2turbo]

Danzeterna, now my radiator water very oily. Is this normal?

Oh! engine oil?

 

[wsonny]

Is tat mean serious leaking??

 

[DanzEterna]

Danzeterna, now my radiator water very oily. Is this normal?

no not normal leh. try flushing it & fill up with Toyota coolant (red color) bout rm18 per bottle 1L.

 

[vr2turbo]

Is tat mean serious leaking??

Got to check what oily stuff. If engine oil, then is serious problem. Like bro. Danz said, try flushing and see....

 

[wsonny]

no not normal leh. try flushing it & fill up with Toyota coolant (red color) bout rm18 per bottle 1L.

I did the flushing and yesterday n today did it again. Still found the oily water flushing out... Actually wat make this to happen. I only know tat water can leak into the engine block.

 

[DanzEterna]

if got EO leak into your radiator means it can happen vice versa,
better send to your mech for futher check up. a top overhaul might be needed.