Perdana V6 Community Forum *

vemalv6

Junior Member
Mar 31, 2014
6
0
501
Kuala Lumpur
Hi all .. need help ..my v6 has been jerking so n chk gb panas so install cooler .. still gt jerking .. tukar fuel pump nw no jerking .. bt wen driving .. will be fine a while n thn suddenly tekan minyak like to power at all n engin shutdown .. plz help
 

sarled

Known Member
Sep 14, 2012
63
28
518
Semenyih
Means your pump definitely not your problem.
It's difficult to troubleshoot engine failure online, but you can slowly try to eliminate one by one. Engine will shutdown or stall if:
  1. No fuel sampai
  2. No spark sampai
  3. Timing out (cannot be)
  4. No compression (cannot be)
  5. Crank sensor rosak (did you see rpm meter go crazy when you tried to restart?).
 

sarled

Known Member
Sep 14, 2012
63
28
518
Semenyih
If you confirm fuel pump and injectors are okay. And your rpm seems ok when you attempted to restart then you may have a problem with your ignition system. You have 3 main things that may go wrong (besides crank sensor), ignition coil, distributor and your ECU. Oh, did your mechanic adjust your minyak cable?
 

zeus83

500 RPM
Senior Member
Oct 29, 2006
979
55
1,528
KL-Damansara
Hi guys,

so my v6 gb gears started to slip....i guess i need an overhaul or change...any idea where to get good prices.
what about 2nd hand?

PS: i have already installed an oil cooler but it was too late i guess :(

Thanks!
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Hi guys,

so my v6 gb gears started to slip....i guess i need an overhaul or change...any idea where to get good prices.
what about 2nd hand?

PS: i have already installed an oil cooler but it was too late i guess :(

Thanks!
If you have been having this gb from new or you know the history better to overhaul. Getting 2nd hand or from chop shop you don't know the history of it....
 

zeus83

500 RPM
Senior Member
Oct 29, 2006
979
55
1,528
KL-Damansara
honestly i wanna let go my perdana:bawling:....so a recon will not be that cheap :-/
was wondering on how much a chop shop will be?

ill try going the recon option....any shops to recommend?
 

kurt_629

500 RPM
May 2, 2013
872
54
528
johor

GeniusBanana

Junior Member
Jan 31, 2011
12
0
501
Kuala Lumpur

Random Post Every 5 Minutes

All WiSE owner, or those who changed their extractor to the WiSE 4-2-1 know that the engine bay is extra hotter than normal Wira.

This is due to the nature of the 4-2-1 extractor, and also due to the heatshield that is not long enough to cover the top of the primary pipes.

Other than hot engine bay, that leads to accelerated ageing of the rubber & plastic parts, hotter intake air temperature, etc... the exposed extractor also means that the heat lost in the tubing can be affected by...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience