Perdana V6 Community Forum *

[DanzEterna]

wah yeke......so young can bid for single digit...yala confirm duit bapak...
i wanna bid nice 4 digits pon susah......

 

[nasgohan]

Hi All !
Need ur opinion and avdice here!

Im planning to convert my perdana sei tranny to manual.
Ermmm,sei manual tranny cames from which engine codes and model?
and how much it gonna cost including installation?

 

[DanzEterna]

use evo3 gearbox set, it does fit.....
summore got lsd...
installation depends on workshop & your negotiation skills :)

 

[nasgohan]

use evo3 gearbox set, it does fit.....
summore got lsd...
installation depends on workshop & your negotiation skills :)

Evo 3 ?
Some say SEi manual gbox are similar with wira/putra/satria 1.8?
ist it?

 

[DanzEterna]

not sure la bro....maybe can but got minor modification...
summore your gear lever travel will be far..if u shift to gear 1 ,3 & 5 the gear
can touch your radio.....if want to reverse must pull up handbrake 1st.....

the best is to swap evo3 gbox in.....cun2 bro...

 

[nasgohan]

not sure la bro....maybe can but got minor modification...
summore your gear lever travel will be far..if u shift to gear 1 ,3 & 5 the gear
can touch your radio.....if want to reverse must pull up handbrake 1st.....

the best is to swap evo3 gbox in.....cun2 bro...

Ermm.Im thinking bout the same too.
Is this the complete parts from evo 3 needed to pump in my SEi?

.

Any other thing to be alter/install etc?

 

[DanzEterna]

looks like its complete...dun forget the starter...
that should be it...my fren told me make sure install it in a specialist garage...dun simple send to any wshop....

ag motorsports should be able to do so...tanya lan....

 

[nasgohan]

Ag motorsport location?KL ke bro?
Im at JB.
My friend told he will help to get an original SEi manual gbox asap since his brother said can find.
But if no other choice then evo3 gbox la.
My gbox now problem at 4th gear only.
When shifted from 3rd to 4th(between 80kmh to 90kmh cannot tekan pedal too much.Gegar kuat.
Must layan mcm kura2 until 100kmh above then ok.

 

[DanzEterna]

memang sei manual box available..but price rm4k++....
evo3 only rm1.8k full set..that was 3-4 mths ago la...from ayie....

ag motorsports is in cheras kl, since youre in jb...can look for aza garage or Mines998 garage...u can ask him....

 

[nasgohan]

Gone to ag website odi.boleh jejaln kl skali nti.
aza garage aka panjang ermmm he is too busy.
Mines don know the workshop(vis work aotulab maybe)

Anyone here want to swap evo 3 to SEi?He he he.ill top ou 8k he he he

 

[DanzEterna]

yala....
yeap mines wshop is visworks.....
in mudah got 1 vr4 rs i think top up bout rm7k++....

 

[nasgohan]

yala....
yeap mines wshop is visworks.....
in mudah got 1 vr4 rs i think top up bout rm7k++....

i went to vis work last 2 week do some tuning but which one is mines?
if can do there better la.later today go there again lah
cll ayie mudah just now.
evo3 gbox compete set rm2500 +install labour rm600 =Rm3100
Is it normal danz?

 

[mines998]

i went to vis work last 2 week do some tuning but which one is mines?
if can do there better la.later today go there again lah
cll ayie mudah just now.
evo3 gbox compete set rm2500 +install labour rm600 =Rm3100
Is it normal danz?

Danz don't miss lead ppl lar...I don't own the workshop I customer also...
I can recommend some workshop only Viswork is more on engine tuning and upgrading. If want to convert manual I won't ask you go to Viswork.

 

[DanzEterna]

he usually goes there on weekends la...he working in SG on weekdays....
u get his number & col him....can lepak with clockwork & calvin too....
wah now increase edi...last time rm1.8k only....cos many ppl knows sei can use e3 gbox....
at least ok la.....u try tekan2 him abit sure can wan.....at least cheaper than sei manual box....rm4k++ not include workmanship......summore e3 got lsd. but he confirm can masuk sei rite?

 

[nasgohan]

Danz don't miss lead ppl lar...I don't own the workshop I customer also...
I can recommend some workshop only Viswork is more on engine tuning and upgrading. If want to convert manual I won't ask you go to Viswork.

mines,u lived at tampoi rite?
i work at tmn century near hotel grand paragon.
any wshop u can suggest me ?

---------- Post added at 12:12 PM ---------- 6 hour anti-bump limit - Previous post was at 12:07 PM ----------

he usually goes there on weekends la...he working in SG on weekdays....
u get his number & col him....can lepak with clockwork & calvin too....
wah now increase edi...last time rm1.8k only....cos many ppl knows sei can use e3 gbox....
at least ok la.....u try tekan2 him abit sure can wan.....at least cheaper than sei manual box....rm4k++ not include workmanship......summore e3 got lsd. but he confirm can masuk sei rite?

ayie sell the parts only.he say tanya kedai sebelah boleh pasang ke x
call pomen kedai sebelah he say"boleh,mounting kna buat and adjust.need 3day to settle.cost rm600

need confirmation from all master here can or not install ?
if can wether JB or KL next week ill go pasang.

 

[mines998]

I would suggest to my service workshop at Taman Iskandar is quite near to yr place. I will go Viswork tomorrow if you going there also we meet up then I bring u go over.

 

[nasgohan]

I would suggest to my service workshop at Taman Iskandar is quite near to yr place. I will go Viswork tomorrow if you going there also we meet up then I bring u go over.

taman iskandar jalan apa Mines?
ill ask my despatch go there 1st
Tmoro cannot la.Need to atend my wife company family day.
mybe u can give ur hp no.

mine is 016-7956327

 

[mines998]

I just give a call to workshop they say very troublesome to do it. Nevermind later I give you another contact.
My contact 017-7126995

 

[nasgohan]

Tq a lot mines.
where u work at spore?

 

[DanzEterna]

Mines...anything related to viswork i relate to u ma...
u can bring in bussiness for them...