Microtech

celikancil

Known Member
Senior Member
May 17, 2006
347
0
1,516
one more thing....
does mtx8 have the anti lag system????
if have how to activate?????
 

rpm2racing

Known Member
Senior Member
Jun 3, 2004
197
5
3,018
Check all Vacuum hose,check the compression engine.If Not bring the car to the workshop.We can check for u.Got the Anti lag.Connect the Blue/Red wire to 12v retard the timing and set the REv Limit what rpm u want.
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
celikancil : evo2, nice.. maybe u can call me, and i'll hook u up wit joshua. 0163571811
 

KL3873Q

Known Member
Senior Member
Dec 4, 2003
134
0
3,016
rpm2,
I have a problem of my air temperature reading is always high, more than 90degree C even before engine start in the morning. iam using the ltx-8s ECU FOR 4AGTE and using the Toyota original air temp sensor. i have check the sensor and replace with other air sensor, wiring also checked but still the same, what seen to be the problem?
 

rpm2racing

Known Member
Senior Member
Jun 3, 2004
197
5
3,018
I have this problem before with SR20.When i check with Microtech Australia.Need to send back for check the software problem.After that ok.
 

celikancil

Known Member
Senior Member
May 17, 2006
347
0
1,516
xtremeleo: not ori evo 2 la.... i use malaysia car la.... but the jantung has change to evo2 la......
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
as i replied in our pm, u r using an engine more powerful then mine and dats respectable :) hoho..
 

celikancil

Known Member
Senior Member
May 17, 2006
347
0
1,516
xtremeleo: thanks........... actually what car r u using????
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
daihatsu mira : sadly iam not, iam driving a daihatsu aura. hoho.. if u see d most hideous aura on the road, dat wud be me
 

KL3873Q

Known Member
Senior Member
Dec 4, 2003
134
0
3,016
rpm2,
So my ecu need to send back for reprogramme, it is warrant by microtech as it is fault on the programm not installer fault. BTW can sms me your number mine 0128888741, need to check on microtech with you.
 

xtremeleo

3,000 RPM
Senior Member
Oct 18, 2005
3,247
464
5,183
celikancil : yep, iam living in selayang

daihatsu mira : i think iam the only charade kot.. hoho
 
Oct 14, 2006
1
0
1,501
i need information for new model microtech. and install my car. how much and how long take to siap? My car is convert evo2 standard. Have problem with original ecu.
 

Daihatsu Mira

Known Member
Senior Member
Jan 23, 2005
334
1
3,018
Sabah
Visit site
DiabloVT said:
i need information for new model microtech. and install my car. how much and how long take to siap? My car is convert evo2 standard. Have problem with original ecu.
DiabloVT...i think u better cal joshua himself for futher info ...coz he seldom online now...
 

arsenalboi

1,000 RPM
Senior Member
Aug 25, 2006
1,017
0
1,636
Phat7 and GeorgeCheng y dont u all buy from mr edmund vaz at vaz maz at jb? he confirm wont chut all this patter with u all one lah. especially the bro from singapore go all the way up to kenna tekan.
 

kennethfong

500 RPM
Senior Member
Aug 11, 2004
506
0
3,016
phat7!!!!

yo long time no c!!! ur always my president!!! i am now looking for some standalone or anything to remove my MAF, i'm now using GSR by the way, n the karman vortex in the MAF doesn't like the HKS SSQV, so i'm lookng for one now..........

any recommendations???? i've called joshua b4 bout mt4, any other options i have??

also i heard microtech is not that good in air cond idling, is this true???? n haltech/motec is too expensive, MS not reliable, power fc doesn't have the default map for my engine, hks fcon dunno, what should i be looking for?

i want a smooth ride but not forgetting power at the same time, means air cond on and off during idling must be rock solid stable!!

cheers