Larger Throttle Body for H22A

[tlyeow]

Hi, I want to enlarge the throttle body on my H22A.

I would like to hear from suggestions from the gurus here on what my options are. The options I know include:
1. Use the DC2 Type R (1.8) throttle body and port it bigger
2. Use the B16 Type R (1.6 ) Throttle body and port it bigger

Any others? Thanks in advance.

 

[Sato]

Get the spoon or mugen throttle body that's designed for Euro r .......sure bigger

 

[crxr]

Or I can sell u a euroR throttle n intake manifold for h22a.

 

[akuma]

wats d size of a std H22A TB btw?

 

[tlyeow]

thanks for the posts.

Sato, you got any jalan for the TB?

crxr, If only the TB alone, how much? (how big issit?). I won't need the intake manifold as I am currently using the Skunk2 Intake Manifold.

 

[Sato]

thanks for the posts.

Sato, you got any jalan for the TB?

crxr, If only the TB alone, how much? (how big issit?). I won't need the intake manifold as I am currently using the Skunk2 Intake Manifold.

I'm not quite sure....but u can try err....Amoil....or those shops around sunway...

 

[J101]

if you are using the skunk2 manifold, might as well match it with the skunk2 h22a TB

PM chris2000 for more info.

H-Series Pro DOHC VTEC

Hi, I want to enlarge the throttle body on my H22A.

I would like to hear from suggestions from the gurus here on what my options are. The options I know include:
1. Use the DC2 Type R (1.8) throttle body and port it bigger
2. Use the B16 Type R (1.6 ) Throttle body and port it bigger

Any others? Thanks in advance.

 

[tortis96]

bro, the last time i also decided to enlarge my TB, i called Avantgarde at ss15, standard h22a TB is 60mm, standard euro r TB is 62mm. but if u wan enlarge, the shop recommend 64mm. u just have to exchange ur TB for his ready 64mm TB. price is rm350. i asked amoil and they r charging RM450.

but plz bear in mind that once u enlarge ur TB, u need a piggyback or VAFC to tune ur air flow or ur car will lag. good luck

 

[tlyeow]

Thanks guys for your thoughts... I've finally decided to get the Skunk2 TB instead to match the Intake manifold.

Tortis96, yes, you are right on the matter. I've got the e-Manage installed already for that..hehe.... but Avantgarde price is pretty good... other place will not take any exchange... likely need to by a larger TB and port it... they usually won't take in your current TB...