INGS+1 front bumper & Bomex Rear Bumper Wira

Status
Not open for further replies.
Exterior and Body

INGS+1 front bumper & Bomex Rear Bumper Wira

yeehau86

Moderator
Helmet Clan
Moderator
Feb 10, 2007
2,856
2,425
5,213
the 1st pic and 2nd pic is the same design,right? is it fibre? pm me the price plz
 

Douglas575

Beyond 20,000 RPM!
Senior Member
Thread starter
Feb 12, 2006
20,932
5
1,638
the 1st pic and 2nd pic is the same design,right? is it fibre? pm me the price plz


Check ur pm bro ....:burnout:


Price Revised for All Bumper ....

call / sms / Pm 017 606 7797 DOuglas.

Refer To Mainpage For Latest Design

24 hour per day.
 
Status
Not open for further replies.

Random Post Every 5 Minutes

My friend who own a mitsu engine with its O2 sensor connect to apexi timer get a very low reading on O2 voltage,0.07 to 0.18volt only.last time it was fine can get normal reading.
sensor already change to another unit but still the same scenario.
the O2 sensor is a 2 wire unit.(blue/white)
i measure the voltage direct from the sensor both wire and get 0.1v same as what shown in the timer.Then i measure with a multimeter,the signal wire (+)and the chasis(-) ground then i get 0.45v...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience