Hardrace- tpv stabilizer link

[tecque]

EK,EG,DC2,EP3 Antiroll Bar Link for front and rear.

-Precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight joint, provides consistence quality and longer life. Unlike any other traditional ball joint are easily to loosen after installed for a period.
-Made of state of art material THERMOPLASTIC, unlike polyurethane material as easy broken.
-Resistant to oil, alkali and ozone, self-lubricating, resilient, high strength and hardness.
- Combining the benefits of two key materials: strength from plastic and compression from rubber.
-Withstand severe weather conditions, and will not brittle, crack or discolor with age.
- Temperature range: -40°C ~ 100°C.
-Crack or brittle from OE rubber or polyurethane bushes is solved by THERMOPLASTIC.
HARDRACE - Performance Suspension Parts

Front 160
Rear 180

Call 012-3811137

 

[Red-Cover]

hi,u sell other suspension goodies other than that?

 

[tecque]

Yea bro... all Honda Hardrace suspension bushs and kits...visit HARDRACE - Performance Suspension Parts thanks

 

[tecque]

Getting a new set of link of honda made in japan, will cost 200++
This oni 100++... more durable

 

[tecque]

This Link give more direct cornering sense...fully utilize ur antiroll bar..

---------- Post added at 02:42 AM ---------- Previous post was at 02:34 AM ----------

Attached picture of car no. 95 and 65 both cars from Lochi and equipped with hardrace products (especially car 95). 65 was 2008 champion and 95 was third and suppose to be first but got into accident and fall back to behind and has to chase back to win 3rd.

 

[David_SGTi]

any stuff for satria gti?

 

[victorchoi]

Yea bro... all Honda Hardrace suspension bushs and kits...visit HARDRACE - Performance Suspension Parts thanks

Do you carry EF Antiroll Bar Link for front set?

 

[steviezach]

besides the whole set of 26 pcs of bushes for EK ..still got wat other need to be changed to make it like " new" car ..and roughly how much it costs

 

[tecque]

besides the whole set of 26 pcs of bushes for EK ..still got wat other need to be changed to make it like " new" car ..and roughly how much it costs

After changing all the 26pcs of bushes... U will defintely feel ur car like new condition, IF u dont feel, maybe u need to change ur absorber.
All bushes will cost about 1500... thanks

---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------

Do you carry EF Antiroll Bar Link for front set?

Sorry bro.. we dont have EF antiroll bar link. thanks

 

[tecque]

Precision assembly production enables spheroid, self-lubricating plastic bearing and bracket has a tight
joint, provides consistence quality and longer life. Unlike any other traditional ball joint are easily to
loosen after installed for a period.

 

[tecque]

some comment about Hardrace from other forum...
Hardrace suspension bushings? - Team Integra
pic hardrace vs energy bushings? - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

---------- Post added at 01:00 AM ---------- 6 hour anti-bump limit - Previous post was at 12:47 AM ----------

some comment about Hardrace from other forum...
Hardrace suspension bushings? - Team Integra
pic hardrace vs energy bushings? - K20A.org .:. The K Series Source . Honda / Acura K20a k24a Engine Forum

 

[tecque]

HARD RUBBER VS POLYURETHANE BUSHING

A lot has been discussed about who is better, in terms of reliability, life span, performance and NVH. I personally have been using polyurethane bushing since 1998, where it is THE products to use for performance replacement bushing during our time and heavy bombing of our mindfrom the advertisement from all the sport compact related magazines. The figure below give the best description between the 2 type of bushing.

 

[tecque]

Better quality than OEM link!

 

[tecque]

Bring UP pOsT>>>>>>

 

[tecque]

BRIng uP pOST.........