ford kuga tyres...

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
235/55/17
any with less noise n good grip tyre
235/55R17 more to SUV and big car size that is why have tyres like
Yokohama Geolandar SUV G055
Michelin Latitude Tour HP
Yokohama Advan ST
Toyo Open Country

However the above more to SUV use so grip is less than those made for passenger car

Mid Range
Michelin P3ST
Goodyear Efficient Grip
Yokohama dB V551
Toyo C1-S

These are mid range tyres, balance of comfort, quiet and performance

UHP
Goodyear F1D5

This model is directional, so maybe more noisy, but grip is good.

Since your priorities are less noise and good grip, better look at mid range.
UHP and Max performance tyres mostly comes in at 45 series and below.
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
downsize to 235/45-17 can have the achilles atr sport 2 which is quite good in term of comfort and with lower sidewall, better grip since have less sidewall flexing
 

6UE5t

6,000 RPM
Senior Member
Oct 8, 2010
6,756
1,300
1,713
Kuala Lumpur
downsize to 235/45-17 can have the achilles atr sport 2 which is quite good in term of comfort and with lower sidewall, better grip since have less sidewall flexing
It will be about 4.7cm smaller in diameter so it's way too small compared to his current tires now. He needs to upgrade to 19' rims in order to use about the same sidewall thickness to maintain about the same diameter.
 

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
downsize to 235/45-17 can have the achilles atr sport 2 which is quite good in term of comfort and with lower sidewall, better grip since have less sidewall flexing
Not sedan like yours, his SUV that is why tyres are big.....lol:biggrin:
 

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines

Random Post Every 5 Minutes

hi all sifus,

i wanna lower down my serena C24 by 1.5" - 2", just for the sake of good
looking.
just wanna ask, can i just cut off the original spring? will this affect
the comfordness?.

just when to a workshop...FTS Motor works in Ipoh, the owner himself is a
drag racer, he advice me to just cut off the original spring and he will
modify the absober (shorten it) for me...

thank you very much!!
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience