Diy : Undercarriage Lights

[Zackwaja R-Spec]

Hello Bro Zen,

Do you selling the underglow lights ah..What about installing, also u do..PM me bro, complete acc. and the price for it.

thanks :)

 

[KeonG]

used to saw a lot of cars with modded Undercarriage Lights.. but it's kind of rare these days on the road? Where have all of u been?

 

[khguan]

i still on my lights everytime i go out at nite... i'm at serdang... :D

 

[KeonG]

cool man.. got on ur light when go clubbing in KL? :)

 

[khguan]

oh... i dun go clubbing ah... n seldom go down KL at nite..

in fact when i go out of serdang i will off de lights... cos i duno where got roadblocks.. keke :D

 

[jaywat]

i will on the light only when i got mood to play..normally is off one hehehe...now some more got strobe light liao...attract more attention. :D

 

[KeonG]

jaywat, sure u attract a lot of chicks when go clubbing lor.. hehe.. :D

 

[jaywat]

haha...i very seldom go clubbing one lar... i will only go bangsar or jalan bukit bintang there yam char ar kap lui only.

 

[bridgestoneRE711]

i duno what happend with wiring . the front and rear cant light up ... so i thought that the wiring got problem , exhange the terminal ...and kaboom ...
there goes my RM7 ballast ... very nice , got smoking effect .

i DIY , i not PRO . i am thinking to sell it off already ...
of course used one la ...

 

[bridgestoneRE711]

ah guan , u install for ppl . it connects the relay or just battery ?

 

[khguan]

huh? wat u mean?

my installation is very practical wan... like this... i use a relay.. so tap a wire from battery for power... then use the small light(cigi lighter light) to control the on/off.. on top of dat i add another switch for road block emergency off.. hehe :D

so when u on ur car small light... de undercarriage lights are ON also... if there is road block.. then just use the switch to OFF it...

 

[jaywat]

Bridgestone, don't give up! Maybe fuse is not functioning? how many amp u use?

 

[bridgestoneRE711]

fuse ar ...
erm ... i am using blue colour one ...
i just tap the + and - from the other ballast + - terminal ...
the problem is the wiring of the tubes , i think too many joints and some joints could be loose .

 

[jaywat]

hmmmm blue is how many amps already?

Use cable lug and connector to connect all the wires instead of tie them together...like that the joint will be stronger.

 

[resilienthunter]

hello diy sifus..

just wanna ask.. is the light lasting? i.e any major problems? like..breakage..fusing.. etc.

also..can someone provide the complete list of stuffs i will need to buy to diy on my car?
i know shnitz about diy..but hoping to attempt the underglow during my coming holidays.. =P

many thanks. any help will be greatly appreciated!!

p.s : really, i know n u t s about diy.

 

[jaywat]

Here is the redundant list of what u r recommended to have before DIY:

1. Two 4 feets and two 2 feets fluorescent tube, if u want side, front and back.

2. 4 ballast - 2x 20w and 2 40w DC choke.

3. Wiring - lasting power cable, length is depend on ur wiring map and car size.

4. 10amp fuse.

5. Fuse holder.

6. Switch to on/off the light.

7. Fluorescent tube holder (Used to connect the 2 pins on fluorescent tube to cable one, and hold it in place NOT ON UR CEILING ONE) .

8. Cable lug to connect wires.

9. Steel band for undercarriage mouting. Cable tie also can but not long lasting.

10. Wire insulator.

11. Voltmeter.
12. Cable tie.

 

[jaywat]

Ohh talking about broken light, don't worry, as long as ur light is mounted higher than the lowest part of car, it won;t be hitted and broken. To protect it from flying stone, just stuff the tube into transparent water hose.

All above stuff u can get from Hardware shop and normal electric shop.

 

[khguan]

resilient hunter,

yo bro.. remember me? i'm de one who install de grounding n VS into ur car... :) hehe

anyway.. if u know nuts about DIYing.. i advice u not to do it.. cos this DIY will involve some wiring using relays switch n power tapping... i think a beginner doing this may be a little risky n may burn a few fuses...

 

[resilienthunter]

yo! its you ar?

wah.. u use 2 nicks one ar?.. !

humm...so not advisable to do eh..okay. u help me install can a?? haha..

 

[jaywat]

khguan got business liao