Diy : Superlon Installation

[blue_hippo]

hahah i dont think so...anyway i just did a car yesterday...kenari nemo.heheh yerp the kenari nemo is being sound proved.
then today have to do a xtrail....

 

[speedz1665]

ninja,

wat u mean by can close the door.....i had no problems liao..all senag senang masuk only...no problems wat so ever...plus dun have to use any glue also....

speedz

 

[takumi86]

speedz1665,

woow.. good work.. two thumbs up! :)
soo.. how about front bonet, front door?..
will superloan later??..

ninja,
i try to figure out when i'm free to do this superloan..
then will buy superloan from you lor!
next year price increase meh?..
don't follow PLUS aar! ;) :D :P

 

[speedz1665]

Takumi,

i have the superlone for the front panels..most probably will do it next week...as for the front bonet, i'm still deciding coz i'm using turbo and am concerned abt the heat issue..although i have read stanleys explanation on heat issue in the engine bay, i am still undecided....

 

[khguan]

good job dude..

for de bonnet.. mayb u try to stick n monitor ur engine temp for a few days 1st.. if ok then leave it.. if not.. remove it lor...

i'm using 6mm superlon on my standard 4G15.. no prob so far... more than half a year liao...

 

[takumi86]

speedz,
dont worry, ur car got that fin (fender's top front tyre)
what actually we call this? that bmw M3 style rite?
and nice custom front bumper also.. (recomend me the shop ca do this later! aa :) )
soo with all ths.. will circulate that hot air, while car static & moving maa..
or maybe you flip up ur bonet a lil bit to make the hot air runaway! :D
but maybe noise also escape aa?!?!.. hehehe..

sorry if above statement is wrong!... ;)

 

[takumi86]

Originally posted by khguan@Dec 20 2004, 13:47
good job dude..

for de bonnet.. mayb u try to stick n monitor ur engine temp for a few days 1st.. if ok then leave it.. if not.. remove it lor...

i'm using 6mm superlon on my standard 4G15.. no prob so far... more than half a year liao...

monitor engine temp from the temp meter
on the dashboard rite??..
i think engine temp should be no problem..
coz the radiator will do this cooling job!!

the best way, put termometer inside the
engine bay lorr.. hehehee.. :D :D ;) :0

 

[khguan]

i dun think de fins will serve much purpose... cos i opened up de fender plactic in de wheel arc b4... dun have any air holes from de engine bay...

maybe if u put a CAI hose from de engine bay n then let de air flow out tru de fins...

 

[takumi86]

khguan,
hahaha... no hole aar?!?.. thanks for the correction!!.. :)
in that case really no function lor...
yaa... better put a CAI hose from de engine bay
n then let de air flow out tru de fins ;)

 

[speedz1665]

Takumi,

Fins no pointler...coz its only in the fender..there's no link between engine bay and fender..the bumper is evo3 wanler..buy from brothers..

Khguan,

thanks mate...will look into it and see howler...i might wanna place a scoop in the hood...soo see leer...

 

[lawrencelyl]

anybody know where to get superlon in melaka ? :P
having hard time to search for it...

 

[Vincew]

;) Ask ninja to go to melaka loh....

 

[lawrencelyl]

haha... if he come to melaka, let me know :D

 

[ninja_iga]

Originally posted by lawrencelyl@Dec 20 2004, 16:01
anybody know where to get superlon in melaka ? :P
having hard time to search for it...

order from me

i can have it delivered to your doorstep,
RM15 shipping charges, any amount

 

[Vincew]

Ya lor,

Order from ninja_iga :ph34r: . He is the sifu here for SUPERLON.......

Even Melaka he can cover lar... u see now he he he...

Hi Ninja: when ara u going to do around Malaysia coverage? :lol:

 

[ninja_iga]

VinceW

i AM doing whole of M'sia :P

as long as the delivery / courier can find your address, we're in business!

a forummer, sang_kancil
bought from me, nothing special wan.
but what's so special was: he is in Kuching! and i'm based in KL....

 

[ninja_iga]

VinceW

i AM doing whole of M'sia :P

as long as the delivery / courier can find your address, we're in business!

a forummer, sang_kancil
bought from me, nothing special wan.
but what's so special was: he is in Kuching! and i'm based in KL....

 

[ninja_iga]

heck a few East Malaysians ordered before :P
no prob (unless it's a holiday, and everything slows down..)

one guy from Terengganu also ordered and received before :)

 

[Vincew]

Ya lar hor ... I did remeber i read it in the thread.

Suggetion: Change your title from "Titan Representative" to "Titan & Superlon Representative Malaysia".........

What do you think? ;)

 

[ninja_iga]

well.........

i work for MpD Auto, they're the manufacturers for TiTANs..

SuperLon is my supplementry income :P