the faster the car get, the uglier the car will be..this is sux
nova said:I think the potential is there for any car so long as it is equipped with the required hardwares and the skills. I have heard that the two Sabah cars(SR20 Datsun and Rx7) already are equipped with half tubbed chassis with big slick tyres and aftermarket drag racing gearboxes, it is a matter of time they can hit 9 and then 8. They only need perseverence and trials which noone can help them other than theirselves.
toyotadriffter said:im from sabah n i know sum of the cars over here...
i know the cars not the drivers...
one of the forumers said the famous Corrolla GL using 3TG turbo....i think he is wrong... its 2TG turbo... using the BLITZ KKK big turbo unit... used to owned by Syarikat Serjaya...nw sold to a person named "pitung"...olso from sabah...
but this car was a legend already..few ppl beat dis car already.. thanks to those 4WD skylines which is so famous nowadays..
cheamys said:When will be the days for these Sabahans’ cars to hit 9 or 8. in Sepang Drag Battle. If they are possible to make this 9 or 8 happen in 5 years later, then others sure will be in 7 or 6 sec. already.
Force Performance said:When 2TG fitted with turbo & 3T crank & pistons [86 x 78mm.] it will become 3TG turbo.
In Sabah,as I knew when Mr. Lo Chee Fui modified the original improved 3TG 8 plugs turbo engine [89 x 79mm= 1966c.c.]can go to a much higher horse power output when compared to d turbo-charged 2TG [480hp @ 35psi. boost] with d 4 plugs configulation.
D 3TG turbo 8 plugs 2.0L. engine fitted with 47/ 38.5mm. bigger valve. TRD con-rods/ 9.5 CR.Arias pistons / Regrinded TRD 320 cams to 330 duration with 11.5mm lift to 8800rpm for spooling huge AirResearch TO4 turbo to achieve approx. 550hp in d 80'
Force Performance said:When 2TG fitted with turbo & 3T crank & pistons [86 x 78mm.] it will become 3TG turbo.
In Sabah,as I knew when Mr. Lo Chee Fui modified the original improved 3TG 8 plugs turbo engine [89 x 79mm= 1966c.c.]can go to a much higher horse power output when compared to d turbo-charged 2TG [480hp @ 35psi. boost] with d 4 plugs configulation.
D 3TG turbo 8 plugs 2.0L. engine fitted with 47/ 38.5mm. bigger valve. TRD con-rods/ 9.5 CR.Arias pistons / Regrinded TRD 320 cams to 330 duration with 11.5mm lift to 8800rpm for spooling huge AirResearch TO4 turbo to achieve approx. 550hp in d 80'
Force Performance said::cool: Last night i n few friends accidently met Mr. Lo Chee Fui at Lintas n have some tea with him n asked him 2 talk about today car technology. n i purposely went into mentioning about more details of d 2T engine modifications in the 80' he had done. He just smiles first & said doesn't mind 2 share most of his engineering by his good memory of d old tech 2T turbo modification. During those day, d result of dyno or even engine balancing, shotpeening n most metals treatment was doned in Australia n most parts are sent from London.
...'KENT CAM' regrounded d original single pattern TRD 320 na cams to 330 max with turbo profile to achieve higher rev. by forcing mass air through as big as possible d valves used.
...d split-pulsed turbo specs. was quite similar to d today huge TO4 turbo which can produced 700hp from d 4 cylinder 2.0L. engine. [Bigger than 3037]
...d 2T or 18R still have 5mm.distance between cylinders 2 cylinders when max out to 91.5 for 3T or 93mm for 18R block. Don't think of d late Honda B or 4AG engine which can't.
...d special qualiflying Lemans 600 hp TRD 4TG 2.2L. turbo with 89 x 90 or 2TG 1.6l. 16v. 85 x 70 ,TRD code:100E is d best racing circuit 2T engines of all.
...according to Mr. LO d peak power for 89 x 78 engine with turbo n TRD 320 cam was 8300rpm. na n TRD 320 was 7800rpm, Special regrinded KENT 330 was peak at 8800rpm.
Hope all above info. can assist others in re-engineering of d old school 2T engine series. :cool:
Force Performance said::cool: Last night i n few friends accidently met Mr. Lo Chee Fui at Lintas n have some tea with him n asked him 2 talk about today car technology. n i purposely went into mentioning about more details of d 2T engine modifications in the 80' he had done. He just smiles first & said doesn't mind 2 share most of his engineering by his good memory of d old tech 2T turbo modification. During those day, d result of dyno or even engine balancing, shotpeening n most metals treatment was doned in Australia n most parts are sent from London.
...'KENT CAM' regrounded d original single pattern TRD 320 na cams to 330 max with turbo profile to achieve higher rev. by forcing mass air through as big as possible d valves used.
...d split-pulsed turbo specs. was quite similar to d today huge TO4 turbo which can produced 700hp from d 4 cylinder 2.0L. engine. [Bigger than 3037]
...d 2T or 18R still have 5mm.distance between cylinders 2 cylinders when max out to 91.5 for 3T or 93mm for 18R block. Don't think of d late Honda B or 4AG engine which can't.
...d special qualiflying Lemans 600 hp TRD 4TG 2.2L. turbo with 89 x 90 or 2TG 1.6l. 16v. 85 x 70 ,TRD code:100E is d best racing circuit 2T engines of all.
...according to Mr. LO d peak power for 89 x 78 engine with turbo n TRD 320 cam was 8300rpm. na n TRD 320 was 7800rpm, Special regrinded KENT 330 was peak at 8800rpm.
Hope all above info. can assist others in re-engineering of d old school 2T engine series. :cool:
Similar threads | |
---|---|