DIY painting.....
What you need....
Philips screw driver short 1 and medium lenght 1.
A flat screw driver small 1 (to pry the lining out incase its hard to pull out by hand)
A old cloth (to cover the flat screw driver head when you pry, so wont scratch the surface).
A plier in case the clip is stuck to the dashboard, you can pull it out using the plier.
A ratchet set.
Step 1.
unscrew the 2 screw holding the center console. The screw is locate at the AC control panel. Another 2 screw is located at the metel panel lining.
After all the screw is taken out its time to pull out the center console and the meter lining by hand if its to hard to pull by hand use the flat screw driver and the cloth. to pry it open. In my case i only use hand. Try to be careful when you pull out the center console and the meter lining. Don't just use brute force as you might risk breaking the clips.
I will show pics og the clip position for the center console, metr panel and the gear lining.
Gear lining metal clips position. (6 clips)
Center console metal clips position (4clips)
Metel panel metal clips position (2 clips)
After everything is taken out it will look like this...
continue...