Hi Bros, I had an issue of oil leaking this morning when traveling from kl to JB. Did a top up but I think too late as conrod is making noise. Currently left the car at workshop and not driving it. If conrod, bearing and/or crankshaft is faulty, any idea if Evos one the same? Any advise on how I should go ant it? Many many thanks bro.
Advise needed on conrod
- Thread starter edwinlkj
- Start date
- Jan 15, 2004
- 1,079
- 115
- 5,163
Evos' are same from 1-9. The bottom end is interchangeable. If taking oil then must open up to see if the bearing is at fault or the piston. Many many options for Evos in terms of rebuild. You can keep it simple and do a OEM rebuild or go wild with a 1,000 hp stroker kit :)
4gbanger
1,500 RPM
it must have been the conrod bearing torn out.. better change to evo or forged parts if u have more budgets.
| Similar threads | Forum | |
|---|---|---|
|
Advice needed from all sifu's.. | MAC : Malaysia Airtrek Club |
| Similar Threads | ||
|---|---|---|
|
|
Advice needed from all sifu's.. | MAC : Malaysia Airtrek Club |
The Marketplace Latest
-
20 rim with 2 tyre
- Started by astonmoo
- Chassis and Wheels
-
19 rim with 235/55/19 tyre
- Started by astonmoo
- Chassis and Wheels
Recent Posts
Random Post Every 5 Minutes
Continued
Ok so now you've installed your air filter, changed your exhaust and still have bucket loads of cash to spend, what's next?
Personally I would recommend something that requires very little maintenance and doesn't take much time to install, so I'd suggest to work on the chassis or...
Enjoying Zerotohundred?
Log-in for an ad-less experience