1st you should have a timing light gun to ensure you have the correct base timing. CW = Advance Timing, CCW = Retard. You should be able to notice very low idling RPM when you have your Crank Angle Sensor (known as Distributor for some) fully turned CCW. Base ignition timing should be around 10-15deg with a/c off.does anyone knows the standard ignition timing degree for 4g93t? or any recommendation on the ignition timing setting (turning the distributor CW or CCW)? mine now is set at full CCW.. dunno is FULLY ADVANCE or RETARD timing...
Change the ecu bro coz u r still using the standard ecu of gsr n the other thing you use evo maaa....the standard ecu reading 449 airflow although u install the emanage...the emanage just a piggyback its just cheating the signal to the ecu.....cheersHi Guys,
Setup:
4g93t with standard ecu and emanage
Evo throttle body, injectors and air flow
HKS SQV
you are right bro...i can answer u the piston, i should be the toyota 4age supercharged piston, it is low compression and semi forged, good upgrade since it can withstand boost better than stock piston.... correct me if other sifu found out i m wrong...cheers
how muchie? im interestedHi guys.. anybody want to buy GSR engine? Halfcut condition. Already upgrade but not 100%. Maybe 80%. Need to cancel the project cause of some reason..
Engine GSR 1.8
Piston wiseco 82mm
Conrod RPM with ACL racing bearing
Duratech camshaft 272 with valve spring
Cam pulley adjustable
Throttle body 70mm
Injector denso 800cc
Turbo ball bearing GT35
Intercooler skyline
Gearbox 4wd LSD
Clutch OS giken twin plate
Haltech management
Boost controller profec B with remote switch
Blow off greddy type R
Wastegate Turbosmart
Also with dashbord, radiator, aircond as per halfcut..
Price u can call me or sms at 017-6522614
Engine still in the car.. Can test but as a co-pilot only la..
Hi all,
I'm the proud new owner of a Wira Aeroback with a 4G93T engine. Engine is pretty stock apart from fuel regulator, mild cams, cam pulley, Evo 3 FMIC. My regular workshop has given a detailed run-through and apart from an leaking oil seal on a driveshaft, oil feed pipe and a few other minor stuff, all is good.
Some questions I have:
1. Previous owner who is a Malay, siad that he had rebuilt the engine and had installed "supercharged" pistons. What is that?
2. I need to change the tires. Using 16" rims. Tire shops recommend 205/45. Is this right? I'm planning to fit Yokohama Parada Spec II. Best price so far is RM248/pc. Anyone knows of a better offer?
3. Please also recommend a good but medium-priced anti-theft window tint.
Thanks.
want to change my clutch.. it's slipping.
any recommendation for street use? brand & price... thx!
---------- Post added at 01:08 AM ---------- 6 hour anti-bump limit - Previous post was at 01:08 AM ----------
want to change my clutch.. it's slipping.
any recommendation for street use? brand & price... thx!