1991 180sx
Engine, drivetrain & cooling
-Stock Rb25det & transmission
-Fuelab fuel pressure regulator
-4L fuel surge tank
-Walbro gss342 (in tank)x1
-Walbro gsl392 (external) x2
-Sard bov
-China 'tial' wastegate
-Simota 3" filter
-Forged Racing radiator
-China 'apexi' intercooler
-China oil cooler
-Spal 14" & 12" radiator fan
-Spal 6" oil cooler fan
-4.3 cusco lsd
-Chinaman 3" piping w/ HKS silent hi power
Chassis & handling
-ORT tie rod/rod end
-Hardrace (if not mistaken) front tension rod
-Megan Racing rear lower arm
-Megan Racing rear toe rod
-Megan Racing rear traction rod
-Cusco rear camber arm
-GTR32 rear anti roll bar
-Solid subframe bushings
-Final Konnexion (jepun mali) front coilovers
-KTS sc rear coilovers
Interior & electronics
-Recaro spg
-Recaro sr3
-Schroth Racing 5 point harness
-Greddy 4 point harness
-Custom hydro handbrake setup
-Greddy Profec B Spec II
-Pivot rpm gauge
-Greddy oil press gauge
-Defi racer boost gauge
-Defi racer oil temp gauge
-Defi racer oil press gauge
-Half cage
-Kenwood iDa-x305 head unit
-Kenwood imprint pxa-h100
-JL audio jx1000-1d monoblock
-JL audio 10w6v3-d4
-Orion XTR475 4 channel amp
-Boston Acoustics Pro60 component set
-All panels intact
Exterior & wheels
-Entah what bodykit with front & rear wide fender
-Custom low mount wing with dodgy brackets
-6x 9.5j et12 rota wheels (as per photo)
-4x 9j et25 rota wheels
Should have listed out everything that'll go with the car. Basically as it is condition.
Will accept swap with a31 as well + top up of course. Otherwise price as below.
Rm58k
Will endorse this engine or swap in a stock standard sr20det and endorse as well.
Rm53k
Sold as it is. Endorsement sendiri settle.
Rm48k
Without engine, everything else jalan together.
Reason for sale : Fund my engine build.
Pm or whatsapp me @ 016-6299159 for further info if interested.
Engine, drivetrain & cooling
-Stock Rb25det & transmission
-Fuelab fuel pressure regulator
-4L fuel surge tank
-Walbro gss342 (in tank)x1
-Walbro gsl392 (external) x2
-Sard bov
-China 'tial' wastegate
-Simota 3" filter
-Forged Racing radiator
-China 'apexi' intercooler
-China oil cooler
-Spal 14" & 12" radiator fan
-Spal 6" oil cooler fan
-4.3 cusco lsd
-Chinaman 3" piping w/ HKS silent hi power
Chassis & handling
-ORT tie rod/rod end
-Hardrace (if not mistaken) front tension rod
-Megan Racing rear lower arm
-Megan Racing rear toe rod
-Megan Racing rear traction rod
-Cusco rear camber arm
-GTR32 rear anti roll bar
-Solid subframe bushings
-Final Konnexion (jepun mali) front coilovers
-KTS sc rear coilovers
Interior & electronics
-Recaro spg
-Recaro sr3
-Schroth Racing 5 point harness
-Greddy 4 point harness
-Custom hydro handbrake setup
-Greddy Profec B Spec II
-Pivot rpm gauge
-Greddy oil press gauge
-Defi racer boost gauge
-Defi racer oil temp gauge
-Defi racer oil press gauge
-Half cage
-Kenwood iDa-x305 head unit
-Kenwood imprint pxa-h100
-JL audio jx1000-1d monoblock
-JL audio 10w6v3-d4
-Orion XTR475 4 channel amp
-Boston Acoustics Pro60 component set
-All panels intact
Exterior & wheels
-Entah what bodykit with front & rear wide fender
-Custom low mount wing with dodgy brackets
-6x 9.5j et12 rota wheels (as per photo)
-4x 9j et25 rota wheels
Should have listed out everything that'll go with the car. Basically as it is condition.
Will accept swap with a31 as well + top up of course. Otherwise price as below.
Rm58k
Will endorse this engine or swap in a stock standard sr20det and endorse as well.
Rm53k
Sold as it is. Endorsement sendiri settle.
Rm48k
Without engine, everything else jalan together.
Reason for sale : Fund my engine build.
Pm or whatsapp me @ 016-6299159 for further info if interested.
Attachments
-
387.5 KB Views: 1,373
-
72.4 KB Views: 467
-
288.7 KB Views: 415
Last edited: