1:10 4wd R/c Nitro Gas Car

Amirul_TGZ

Known Member
Senior Member
Jul 14, 2006
133
0
1,516
www.teamgroundzero.net






-Brand New in the Box (neva play it)
-1:10 Scale Nitro Powered R/C Car
-Drive Type: Shaft Driven
-Drive: Full Time 4 Wheel Drive
-Engine: 15 CXP w/Pull-Start
-Exhaust: Dual Chamber Tuned Pipe with High Flow Header
-Fuel Tank: 2.53oz (75cc), Flip Top Cap
-Full Set Ball Bearings
-Clutch: 2-Shoe
-Brake: Single Disc, Fibber Construction
-Transmission: Two-Speed, Adjustable
-Shocks: Aluminium Alloy Bodied, Oil-Filled with Coil-Over Spring
-Radio: Two Channel AM with Steering and Throttle Trims
-Servos: Two Standard Size and Torque
-Front/Rear Differentials: Sealed with Metal Bevel Gears
-Body: Fully Trimmed and Painted with Rear Wing and Decals Applied
-Steering: Bell-crank Type with Servo Saver
-Adjustable Caster and Camber Settings
-Suspension: Four Wheel Independent
-Operating range: 250M
-Speed: 80km/h

Bought it from Hobby shop for $1,400

selling for $1,000

im located in Canberra Aus. Will post anywhere to msia @ my expense.
 

The Marketplace Top Posts

Random Post Every 5 Minutes

Hello all, I'm currently using a GSR Turbo with TD05H E3 turbo. Using E-Manage blue for tuning and running at 1.1 boost. I'm using E3 fuel injectors 510cc. Blitz boost controller.

I thougt of upgrading to higher topspeed. Curently I'm getting 210kh/h @ 7,000 rpm on stock GSR gear box. What's all the sifu's advice on this? Should I go for E3 gearbox? Or E1..E2 gearbox? Or just chg final gear ratio and add LSD?

What's the recommended boost? If I boost 1.5 bar, should I change the...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience