Gen 2 CPS Thread

[maxpain]

yup...mr djan told us to rev the engine up to 4.5 - 6.5 for shifting gear, if we do this sure can feel the power...the 4th gear of this cps superb..... but hate the 1st sound of the exhaust in the morning seems to hear there were bocor? wonder if u guys experienced that too

bro, try to check ur silencer box.
1st time i get my car got that sound too...then i discover that the silencer box "bocor" at the bottom...

 

[nan83]

huhu.. i'm not play wira gsr lah... wira ebo lah... already sell that car..

now buy wira ebo again... as a weekend car.. cannot tahan lah..

---------- Post added at 05:06 PM ---------- Previous post was at 05:01 PM ----------

yup...mr djan told us to rev the engine up to 4.5 - 6.5 for shifting gear, if we do this sure can feel the power...the 4th gear of this cps superb..... but hate the 1st sound of the exhaust in the morning seems to hear there were bocor? wonder if u guys experienced that too

yaa.. my car also got sound about 20sec if start on cold engine... i tot if come from LCP.. not checkit yet.. will try put silicon spray on my belting, if not gone.. maybe other prob...

 

[maxpain]

huhu.. i'm not play wira gsr lah... wira ebo lah... already sell that car..

now buy wira ebo again... as a weekend car.. cannot tahan lah..

---------- Post added at 05:06 PM ---------- Previous post was at 05:01 PM ----------




sorry la dato'...im very2 terlupa...do u know me or not? :p

 

[nan83]

aiyak... dato' ??? dato tua ka.... huhuhu.... of coz la i know you... huhu

 

[senbe84]

guys...need help a bit.cps means cam profile switching so if we use adjustable campulley and we change the cam degrees,does the cps effect still work?Since cps engages at certain rpm so changing the degree might do what to the cps engagement?make it early?a bit late?

Since we can retard and advance the cam and causes the power band to come earlier or later at high rpm, does the cps engagement rpm still fixed or does it shift also??

saya budak baru belajar...huhu

 

[maxpain]

huhu...very gud question...
got to asked the sifus for this question...dato nan83...i think he can answer the question...:)

---------- Post added at 05:25 PM ---------- Previous post was at 05:23 PM ----------

aiyak... dato' ??? dato tua ka.... huhuhu.... of coz la i know you... huhu

nan, hows ur cps now...no more mods?
since u got car with tebo power...

 

[nan83]

guys...need help a bit.cps means cam profile switching so if we use adjustable campulley and we change the cam degrees,does the cps effect still work?Since cps engages at certain rpm so changing the degree might do what to the cps engagement?make it early?a bit late?

Since we can retard and advance the cam and causes the power band to come earlier or later at high rpm, does the cps engagement rpm still fixed or does it shift also??

saya budak baru belajar...huhu

maxpain also can answer the question laa.... me also budak2 baru blajo...

humm.. change the cam degree will not effect the cps switching... cps switching base on RPM to activate it... once the RPM reach the ecu activation setpoint, ecu will give the signal to hydraulic solenoid to energize it, than the cam switch .. mechanically it not related with campully, the cps switching is using the tappet itself...

fyi, the switching system only at intake cam...

just see vid below to know how cps work...


YouTube - Secret behind the Campro CPS(cam profile switching) engine of the Proton Gen2

 

[nan83]

nan, hows ur cps now...no more mods?
since u got car with tebo power...

yaaa... no more mods..

maybe last upgrade 1.3piston & extractor....

 

[maxpain]

yaaa... no more mods..

maybe last upgrade 1.3piston & extractor....

i can make a question from ur answer...
why gen2 1.6 change they piston to 1.3?
cps pistons did'nt do a good job ka? :)

 

[nan83]

just to increase the compression ratio only...

 

[maxpain]

ooo...ic..ic...
no wonder ppl in club do that...newbie :p

 

[speedo]

any 1 here wiling to share the photo of gen2 pistons..love 2 c d different

 

[ahpaul82]

Piston picture tak ada,

valve cover opened can ah?

 

[boyzone]

Hi Guys,

Nice to read on this thread..
Btw, have any latest modification update?
mind to share ?

 

[andrewleo013]

hi.... does anyone know how to get the RPM signal from campro? From ECU? From dashboard meter? so that i can install the tachometer.

pls help me any sifu..
thanx

 

[tks]

Greetings!!

anyone tried changing the timing belt for this engine before? got a question about the timing markers and how they seem to defy logic...unless i missed something

 

[andrewleo013]

Dear all si fu,

I am newbie over here. Does any one know how to install a tachometer in waja campro? where can i get the RPM signal?

Thanx O.

 

[boyzone]

All CPS folks,

When the 2nd stage cam kick in, can hear the engine sound such like Vtec or Mivec?

 

[reezl]

hallo...
i'm a newbie here though..
i am planning to 'sambar' this gen2 cps..
i have look at the forum in motortrade(sadly can't register), they talk about good things about this model..
and i just happen to found this forum today..huhuhuhu...
due to the good feedback from the users of gen2 cps that i've read, i think its worth buying, considering its proton though.
furthermore, the 2009 model got 5k discount which turn my head 360degree!!!

---------- Post added at 10:38 PM ---------- 6 hour anti-bump limit - Previous post was at 05:47 PM ----------

i heard that there are issue about the height at the rear seat roof...
they said it quite low and will hit head if going on a bump..
how do you guys find this issue affect your satisfaction??

 

[reezl]

going to book 1 tomorrow

 

[boyzone]

just booked a CPS with RM5k discount
2009 Q4 chasis.

 

[reezl]

wah boyzone..
nice one..
what color did u pick??

 

[boyzone]

wah boyzone..
nice one..
what color did u pick??

only left one unit... with black color

 

[teli]

hye...

i own gen2 cps 4 month already...

very satisfy with my car! :proud:

when cps kick in dont have any sound but you will notice from the engine power, around 3800rpm, then at 4800 VIM will activate, quite noisy sound from the engine...
easily can smoke car 2000cc auto tranny..

some more from engine firewall have tiny hole around pedal, when heavy raining sometimes your foot will little bit wet because of this...

for the

 

[boyzone]

hye...

i own gen2 cps 4 month already...

very satisfy with my car! :proud:

when cps kick in dont have any sound but you will notice from the engine power, around 3800rpm, then at 4800 VIM will activate, quite noisy sound from the engine...
easily can smoke car 2000cc auto tranny..

some more from engine firewall have tiny hole around pedal, when heavy raining sometimes your foot will little bit wet because of this...

for the

So, did u highlight to service cantre about those small holes?
Btw, what is the fuel consumption?