Hi guys, i'm not in automotive line and did some survey over internet about it... at first i feel like try keep my engine bay looks clean and not so messy but failed and i'm not rich and really can't afford to send my car over garage to do it. Most of it i'll DIY by myself without over my budget.... Here's some picture...picture tells a thousand words
Here's my old nissan sunny 130y
Before i done anythings on it
After DIY re-located my battery but still look messy and.......:hmmmm:
So I decided to go all wire out and do a full wire tuck and change my engine bay colour.
Tools:
Cheap china Car Jack
spanner and socket set
Hammer
Screw Driver Set
*Be patient*
Moved most of the engine parts
Need:
Degreaser (Bought it with ah nen car wash) = RM10
Sand Paper(600/800) = RM 5
3 x (Primer) Can Spray = RM24
4 x (Colour) Can Spray = RM40
3 x (Clear) Can Spray = RM30
2 x Masking Tape = rm 5
*Time*
it take some time to clean it up and sand it nicely.
Here's my First Layer of Primer(a lot of part did not spray)
Make sure cover up those part that don't need to spray and tape it up.
After few layers of primer and dry it up... is time to paint it red and clean coat
every layer took 15min to 20min to dry it
once every single corner is dry...remove all papers and tape.
here's de result
My paint job sucks, it took me a lot of time to do it
Will update later~
Here's my old nissan sunny 130y
Before i done anythings on it
After DIY re-located my battery but still look messy and.......:hmmmm:
So I decided to go all wire out and do a full wire tuck and change my engine bay colour.
Tools:
Cheap china Car Jack
spanner and socket set
Hammer
Screw Driver Set
*Be patient*
Moved most of the engine parts
Need:
Degreaser (Bought it with ah nen car wash) = RM10
Sand Paper(600/800) = RM 5
3 x (Primer) Can Spray = RM24
4 x (Colour) Can Spray = RM40
3 x (Clear) Can Spray = RM30
2 x Masking Tape = rm 5
*Time*
it take some time to clean it up and sand it nicely.
Here's my First Layer of Primer(a lot of part did not spray)
Make sure cover up those part that don't need to spray and tape it up.
After few layers of primer and dry it up... is time to paint it red and clean coat
every layer took 15min to 20min to dry it
once every single corner is dry...remove all papers and tape.
here's de result
My paint job sucks, it took me a lot of time to do it
Will update later~
Last edited: