SATRIA 1.6 - Seeking advices for TUNING & UPGRADES

[#OGPIM]

Bro., there is 4-2-1 and 4-1 extractors. How to 4-3-2-1?

My bad.... my uncle texted me wrongly...typo :(

 

[#OGPIM]

There's no 4-3-2-1 extractors. Only 4-2-1 or 4-1. 4-2-1 give you a good low to midrange, 4-1 gives you more midrange to high/rev cut. Izso already posted about this and you can read more here - http://www.zerotohundred.com/newforums/showthread.php?t=390895

Thanks....typo by ,y uncle...paiseh :(

 

[#OGPIM]

There's no 4-3-2-1 extractors. Only 4-2-1 or 4-1. 4-2-1 give you a good low to midrange, 4-1 gives you more midrange to high/rev cut. Izso already posted about this and you can read more here - http://www.zerotohundred.com/newforums/showthread.php?t=390895

Got it...
For touge & corner carving....we need low to mid range...means 4-3-1 is the extractor i need.

 

[RENESIS VIII]

Got it...
For touge & corner carving....we need low to mid range...means 4-3-1 is the extractor i need.

Typo again, is 4-2-1.

 

[#OGPIM]

Typo again, is 4-2-1.

pAISEH

 

[vr2turbo]

Newbie read here will get further confused......lol

 

[vr2turbo]

Got it...
For touge & corner carving....we need low to mid range...means 4-2-1 is the extractor i need.

Most mods and even at exhaust shop they will recommend 4-2-1.....

 

[sanekit]

4 then join 2 to 1 first, the other 2 don't join so got 3, then further down only join the 2, then got 2 then join again to 1 .......lol

Bro. Issuzark go try new system......hhahahahhaha

aiyo.. so confusing...... :alberteinstein:

Got it...
For touge & corner carving....we need low to mid range...means 4-3-1 is the extractor i need.

You'll be surprised that most of the time your RPM will be on the midrange to revcut.

 

[vr2turbo]

You'll be surprised that most of the time your RPM will be on the midrange to revcut.

You kena poison dy......lol

 

[sanekit]

You kena poison dy......lol

LOL! Based on my runs, the car seldomly go below 3k rpm on touge. It's always on 3.5k and above.

 

[vr2turbo]

LOL! Based on my runs, the car seldomly go below 3k rpm on touge. It's always on 3.5k and above.

But your engine got slight mod, right?

 

[sanekit]

But your engine got slight mod, right?

Hmmmmm.. Logically the engine will be more on the mid towards rev cut even on stock engine if you drive touge. Unless you wanna enjoy the scenery then u won't bother pushing it on the corners.

 

[vr2turbo]

Hmmmmm.. Logically the engine will be more on the mid towards rev cut even on stock engine if you drive touge. Unless you wanna enjoy the scenery then u won't bother pushing it on the corners.

Then no need talk good fc or how to save fuel dy......hahhahahhahahha

 

[issuzark]

Save fuel was never in his consideration. Lel

Sent from my SM-G900F using Tapatalk

 

[sanekit]

Then no need talk good fc or how to save fuel dy......hahhahahhahahha

Save fuel was never in his consideration. Lel

Sent from my SM-G900F using Tapatalk

10km/l ok laa..