Hello friends!
I got the opportunity to polish a Toyota Vitz, dark blue, gorgeous in the shade. But in the sun, it’s very nicely filled with swirls and scratches.
Close up pics
Washed n Clayed:
Lacking definition, dull, no depth
The ride’s best companions, swirls and scratches
Vertical panels
Vertical panels
The hood and the top
Close-up
Other paint defects
calling the

---------- Post added at 09:11 PM ---------- 6 hour anti-bump limit - Previous post was at 09:07 PM ----------
Polishing
I started with a test section on the hood, Makita, Menz 203s on LC white pad. Very little effect!
I moved to Menz PG on LC wool polishing pad. Results were nicer and less holograms than foam. Then, I found the swirls and scratches were hiding other defects such as long RDS, pits, and orange peel. I stepped down to Menz 203s on LC white with Flex DA. Results were superb, clear definition, no holograms and swirls, the deep RDS remained but were almost unnoticeable. Only the hood I refined with Flex, PO85rd on LC black. This was the most battered part.
Deep RDS remain, but they’re not easy to capture. Only noticeable from an angle, & with a detailer’s eye!
Pits and pores discovered while polishing. Wet-sanded 2000 grit, then continued.
Hello!
Looking at the ant: is it hydrophobic?
Remember
You can't see... can you?
Now
Can you see now, ... old uncle watching?
Thanks God, it came very nice.
---------- Post added at 09:18 PM ---------- 6 hour anti-bump limit - Previous post was at 09:11 PM ----------
Some 50-50 pics:
Here are some finishing pics
I missed on my next lucky victim, she’s sold.
I already got Popeye's arms after this detail.
Some reflection shots
Mirror Finish on the side mirror
Mauritian Tea
Old & new house
My buddies never let me down thanks God
Your comment and thoughts are most welcome and many thanks to all those who kindly helped me their advice.
God bless you all.
Best regards
Zaid :wavey:
I got the opportunity to polish a Toyota Vitz, dark blue, gorgeous in the shade. But in the sun, it’s very nicely filled with swirls and scratches.
Close up pics
Washed n Clayed:
Lacking definition, dull, no depth
The ride’s best companions, swirls and scratches
Vertical panels
Vertical panels
The hood and the top
Close-up
Other paint defects
calling the

---------- Post added at 09:11 PM ---------- 6 hour anti-bump limit - Previous post was at 09:07 PM ----------
Polishing
I started with a test section on the hood, Makita, Menz 203s on LC white pad. Very little effect!
I moved to Menz PG on LC wool polishing pad. Results were nicer and less holograms than foam. Then, I found the swirls and scratches were hiding other defects such as long RDS, pits, and orange peel. I stepped down to Menz 203s on LC white with Flex DA. Results were superb, clear definition, no holograms and swirls, the deep RDS remained but were almost unnoticeable. Only the hood I refined with Flex, PO85rd on LC black. This was the most battered part.
Deep RDS remain, but they’re not easy to capture. Only noticeable from an angle, & with a detailer’s eye!
Pits and pores discovered while polishing. Wet-sanded 2000 grit, then continued.
Hello!
Looking at the ant: is it hydrophobic?
Remember
You can't see... can you?
Now
Can you see now, ... old uncle watching?
Thanks God, it came very nice.
---------- Post added at 09:18 PM ---------- 6 hour anti-bump limit - Previous post was at 09:11 PM ----------
Some 50-50 pics:
Here are some finishing pics
I missed on my next lucky victim, she’s sold.
I already got Popeye's arms after this detail.
Some reflection shots
Mirror Finish on the side mirror
Mauritian Tea
Old & new house
My buddies never let me down thanks God
Your comment and thoughts are most welcome and many thanks to all those who kindly helped me their advice.
God bless you all.
Best regards
Zaid :wavey:
Last edited:
so many Sifus at ur place la