Quality forged 2323cc Stroker kits

[modmonger]

Greetings everyone,
We are staring a company dealing with importing of performance parts from America as an alternative to the many Japanese Domestic Product parts you have already available.

Would you be interested in a stroker kit for Mitsubishi Evolution 1-8MR (ALL)

2323cc (86mm X 100mm)

includes:

Nitrated stroker crankshaft
Full-forged 4340 Steel H-Beam con-rods
Full-forged Pistons 9.0 C.R

All components of this system is heat treated, balanced and X-rayed to guarantee quality. Made and designed in the USA by companies such as ROSS and EAGLE, both very respected and reputable companies. RnR Racing, Buschur Racing and 2 out of the 3 500++WHP evos in October 2004 Dsport Magazine uses the same piston/con-rod combo, all of which are doing 9++ sec 1/4 miles.

We noticed that so far there are only 3 strokers in the Malaysian market which are those made by TODA, TOMEI and JUN. Most of the feedback we received leads us to believe that TODA is the cheapest by far but does not include forged con-rods. Tomei and Jun are very good kits but are extremely expensive.

Includes all Pins, pin fittings, locks, piston rings and all other necessary hardware for installation.

This system is build to increase durability, drivability, streetability and to complement large turbos and nitrous.

Made to handle 7500rpm and 800bhp.

Price? RM7000.

Please give us any suggestions and/or feedback. Thank you.

 

[Revo]

Any website or document (scanned) for this?

 

[modmonger]

We are currently gauging interest on the product. Just to gain feedback from those interested. We will definitely have a website and maybe even produce a demo car in the near future if we see that there is interest. What documents are you talking about?

 

[speedz1665]

do you have anything similiar for a 4G93T 1.8 gsr and the pricing

 

[modmonger]

Originally posted by speedz1665@Feb 17 2005, 16:07
do you have anything similiar for a 4G93T 1.8 gsr and the pricing

Greetings,
We do not have any products developed for the 4G93T just of yet. However if I can gather enough interest I can forward this information to the technical team at our US correspondance and see if they can come up with something. Keep in mind that these people are certified trained professionals and will not deal with untested products. Just simply building a stroker without proper engineering can ruin reputations and not to mention your wallet :D

 

[NoTiGuY]

rear this in the other american evo forum.... so far not much bad feedbacks.....

 

[modmonger]

Originally posted by NoTiGuY@Feb 18 2005, 22:40
rear this in the other american evo forum.... so far not much bad feedbacks.....

People on the american evo forums know and trust USDM brands. We are unsure of how american products are received in Malaysia. Everyone has heard of JE and Crower but unsure of other brands like ROSS, EAGLE, Oliver, SCAT, AEM, Carillo, and load of others.

These products are just as good if not better then Japanese counterparts and a lot cheaper. In fact some of the brands such as JUN uses cosworth pistons from the UK.

We need to know what you all think! Your feedback might give you more choices for your modification needs. So please give us some feedback.

 

[moppy]

Originally posted by modmonger+Feb 18 2005, 22:59 -->

QUOTE (modmonger @ Feb 18 2005, 22:59 )

--QuoteBegin-NoTiGuY

@Feb 18 2005, 22:40 rear this in the other american evo forum.... so far not much bad feedbacks.....

People on the american evo forums know and trust USDM brands. We are unsure of how american products are received in Malaysia. Everyone has heard of JE and Crower but unsure of other brands like ROSS, EAGLE, Oliver, SCAT, AEM, Carillo, and load of others. These products are just as good if not better then Japanese counterparts and a lot cheaper. In fact some of the brands such as JUN uses cosworth pistons from the UK. We need to know what you all think! Your feedback might give you more choices for your modification needs. So please give us some feedback. [/b][/quote] :D I heard of eagle, ross and oliver b4. I heard TOMEI are the best and reliable to run in track.

 

[modmonger]

Originally posted by moppy+Feb 20 2005, 18:13 -->

QUOTE (moppy @ Feb 20 2005, 18:13 )

Originally posted by modmonger@Feb 18 2005, 22:59 --QuoteBegin-NoTiGuY

@Feb 18 2005, 22:40 rear this in the other american evo forum.... so far not much bad feedbacks..... People on the american evo forums know and trust USDM brands. We are unsure of how american products are received in Malaysia. Everyone has heard of JE and Crower but unsure of other brands like ROSS, EAGLE, Oliver, SCAT, AEM, Carillo, and load of others. These products are just as good if not better then Japanese counterparts and a lot cheaper. In fact some of the brands such as JUN uses cosworth pistons from the UK. We need to know what you all think! Your feedback might give you more choices for your modification needs. So please give us some feedback.

:D I heard of eagle, ross and oliver b4. I heard TOMEI are the best and reliable to run in track. [/b][/quote] In my opinion Tomei is the best. Cheaper then JUN but just as good. Still very expensive though.

 

[Revo]

Do u want to sponsor a car to be demo for your stroker kit? I believe this can help u to advertise and gain trust when people look at the real thing. ;)

 

[LordAlfa]

People on the american evo forums know and trust USDM brands. We are unsure of how american products are received in Malaysia. Everyone has heard of JE and Crower but unsure of other brands like ROSS, EAGLE, Oliver, SCAT, AEM, Carillo, and load of others.

These products are just as good if not better then Japanese counterparts and a lot cheaper. In fact some of the brands such as JUN uses cosworth pistons from the UK.

We need to know what you all think! Your feedback might give you more choices for your modification needs. So please give us some feedback.

Carillo. Best rods that money can buy. 4AG formula atlantic uses Carillo Rods.

 

[Revo]

:)

Great..... :)