Perdana V6 Community Forum *

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

chriiz18

Known Member
Senior Member
Apr 5, 2005
300
4
3,018
Hi Guys need some help on my perdana v6. It's a five years old car and i've been sending to proton for general service. Ever since i've bought this car new the GB is always a problem. Proton SC has already change 5 GB for the past 5 years. Till now problem is not solved. Btw, warranty is over. Mileage is about 150k kms

Here are the problems:-
- GB atf cooler is always hot. I've change the ATF oils to synthetic. Need to pour some water to at atf cooler to cool it down.
- Jerks a lot when down shift and up shift.
- I thought of changing the GB to a better GB from mit. Any recommendation?
- Engine jerks.
- when i drive at night, lights seems to be very dim and dash lights as well. after driving hard for awhile everything seems to be ok or back to normal. I've checked the charging alternator and its good. Same goes to the battery. Can anyone tell me whats the std battery size for perdana v6.
- Sometimes can't start. No crank. Need to turn the keys at least twice before starting up.

Can anyone please help me please. Thank You.
 

NeuroOne

WFH
Senior Member
Sep 11, 2006
2,078
181
1,663
Putrajaya
Here are the problems:-
- GB atf cooler is always hot. I've change the ATF oils to synthetic. Need to pour some water to at atf cooler to cool it down.
- Jerks a lot when down shift and up shift.
- I thought of changing the GB to a better GB from mit. Any recommendation?
- Engine jerks.
- when i drive at night, lights seems to be very dim and dash lights as well. after driving hard for awhile everything seems to be ok or back to normal. I've checked the charging alternator and its good. Same goes to the battery. Can anyone tell me whats the std battery size for perdana v6.
- Sometimes can't start. No crank. Need to turn the keys at least twice before starting up.

Can anyone please help me please. Thank You.
1. ATF cooler will always be hot. optimum temp is around 80C. also, replace the hoses and make them direct from gb to ATF cooler. Proton installs the hoses go thru the radiator.
2. gb jerk might indicate the solenoids in the valvebody are not functioning nicely. maybe u need to replace ATF and ATF filter. how long the interval before u change ATF and ATF filter?
3. a better gb would be a manual gb. any auto gb from Mitsu in the same generation may encounter the same problem..
4. engine jerks how?
5. standard battery size is ns60 but i use ns70. better go bigger.
6. if no cranking noise, maybe starter starting to get weaker or maybe not getting enough juice. try installing starter relay.

---------- Post added at 06:04 PM ---------- 6 hour anti-bump limit - Previous post was at 05:59 PM ----------

guys, anyone installed these (lamps)?

hows the LED life span...cause those "brothers" kindda barang...LED cant tahan :P
my fren who works at NHF (the original producer of the projector headlights), have used the headlights for more than a year without any problem.
there are other manufacturer that copied the design..
well, NHF gives 1year warranty (or is it 6 months, cant remember), so if after warranty then the headlights rosak, then unlucky la. hehe..
 

chriiz18

Known Member
Senior Member
Apr 5, 2005
300
4
3,018
Thank you very much for the reply.

ATF changed about 30k kms.

Engine jerk...dont know how to explain. Might need to check the coil packs.
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
just install a fan infront of your atf cooler, will eliminate atf overheat & jerking problems.
im using ns60, use ns70 only if u have ICE in your car.

can change starter carbon brush....
 

chriiz18

Known Member
Senior Member
Apr 5, 2005
300
4
3,018
yea been looking for a fan that actually fit right at the atf cooler.
still no luck and busy with work. hehehe...

Not using any ice but planning to install some.
 

NeuroOne

WFH
Senior Member
Sep 11, 2006
2,078
181
1,663
Putrajaya
i put my ATF cooler in front of the radiator fan (which keeps on turning).
if u can find a small fan, even better.

if u upgrade battery to ns70 now also good, better cranking power, last longer.
my dry Bosch S4 battery is now more than 2 years old.

ATF i change every 20K km. ATF filter every 40K km..
 

chriiz18

Known Member
Senior Member
Apr 5, 2005
300
4
3,018
something weird happen while i was driving. lights so dim and everything seems to be dim. engine loss power aircond also no power. car feels sluggish. then everything went back to normal. i've check the battery and charging alternator but no problem. wiring problem?
 

zeus83

500 RPM
Senior Member
Oct 29, 2006
981
55
1,528
KL-Damansara
thx NeuroOne,

btw...my full fuel tank ~RM105 is getting me as far as KM450 only is it normal or something is wrong? meaning average 8.2KM/L my Celica turbo is getting the same with lots of boost :hmmmm:
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
hello guys , nak tnye nie . aku ade 1 perdana sei . tp gear auto . nk change to gearbox manual , agak2 brape ? ade jenis2 gearbox ke ?
bro, pls use english...

---------- Post added at 03:54 PM ---------- 6 hour anti-bump limit - Previous post was at 03:53 PM ----------

alternator giving signs of failure soon...
 

NeuroOne

WFH
Senior Member
Sep 11, 2006
2,078
181
1,663
Putrajaya
hello guys , nak tnye nie . aku ade 1 perdana sei . tp gear auto . nk change to gearbox manual , agak2 brape ? ade jenis2 gearbox ke ?
standby la dalam rm4K.
gb banyak, from Perdana GLX manual, RVR, Eclipse, the old Wira diesel also can..
 

AuzarO

Senior Member
Jan 7, 2007
4
0
1,501
Hi guys, i just bought my 2001 PV6 in a week! So far am happy with my car. I've already service the engine, change engine oil, oil filter and change the atf fluid. I'm yet to install ATF cooler for my gb. Any recommendation from you guys? JASMA,HAYDEN WORKS?
And maybe you guys could assist me on what to do next.

I heard it is standard for a V6 to have wind noise when speeding more than 100kmh. How to void the wind noise? need to replace the rubber trim or......? no idea how to solve.

Other than that, I love my new V6 even tho bought 2nd hehhehehe
 

mkdreamervl

Known Member
Senior Member
Jul 6, 2005
327
32
1,528
PJ
Just dropping by to say Happy New Year Guys, drive safe during the long holidays as most people will be clearing leave and going places or balik kampung :)


Currently timing belt reaching 90,000 Km already. Was thinking of asking mechanic to just jack up the whole engine and check for oil leaks and change all the rubber seals / hoses /connectors and replace timing belt / spark plugs / water pump 1 shot. Considered semi major service lah i guess.

Btw NGK iridium IX with the 0.6mm tip really does last longer than the denso iridium 0.4mm tip. And tried Amsoil fully synthetic 20w50 which runs pretty well and minimal sluggishness even after long fast drive. Maybe its just placebo effect.. I dunno :)

Zeus : Your Rm105/450KM is city or highway or Mixed ? If fully city... ok lah... its around 18-25 cents depending on your right foot :)
 

zeus83

500 RPM
Senior Member
Oct 29, 2006
981
55
1,528
KL-Damansara
well its city...but considering penchala link is a highway i'd say mixed
 

DanzEterna

Moderator
Moderator
Senior Member
Nov 1, 2007
15,910
3,371
3,213
PJ
www.primeperdanaclub.com
hi guys,

I got 2 pc of Toyo Tyres to let go... Price Nego till sell.

http://www.zerotohundred.com/newfor...425462-18-toyo-proxes-t1r-tyres-for-sale.html
cy...wat happened to u la? MIA for quite some time edi..u still using perdana./?

---------- Post added at 02:06 AM ---------- 6 hour anti-bump limit - Previous post was at 02:02 AM ----------

Hi guys, i just bought my 2001 PV6 in a week! So far am happy with my car. I've already service the engine, change engine oil, oil filter and change the atf fluid. I'm yet to install ATF cooler for my gb. Any recommendation from you guys? JASMA,HAYDEN WORKS?
And maybe you guys could assist me on what to do next.
** go for hayden bro.
I heard it is standard for a V6 to have wind noise when speeding more than 100kmh. How to void the wind noise? need to replace the rubber trim or......? no idea how to solve.
**there is a chrome strip on your windscreen frame, that is the common problem, if its not then time to change your rubber linings on all doors.
Other than that, I love my new V6 even tho bought 2nd hehhehehe

bro replies in red

---------- Post added at 02:07 AM ---------- 6 hour anti-bump limit - Previous post was at 02:06 AM ----------

Just dropping by to say Happy New Year Guys, drive safe during the long holidays as most people will be clearing leave and going places or balik kampung :)


Currently timing belt reaching 90,000 Km already. Was thinking of asking mechanic to just jack up the whole engine and check for oil leaks and change all the rubber seals / hoses /connectors and replace timing belt / spark plugs / water pump 1 shot. Considered semi major service lah i guess.

Btw NGK iridium IX with the 0.6mm tip really does last longer than the denso iridium 0.4mm tip. And tried Amsoil fully synthetic 20w50 which runs pretty well and minimal sluggishness even after long fast drive. Maybe its just placebo effect.. I dunno :)

Zeus : Your Rm105/450KM is city or highway or Mixed ? If fully city... ok lah... its around 18-25 cents depending on your right foot :)
must as well do top overhaul..
 

mkdreamervl

Known Member
Senior Member
Jul 6, 2005
327
32
1,528
PJ
Danz : Mech says better don't touch up to gasket, cause after changing engine might loose pressure/power. Says it will never be the same as ori... so i'm prety worried to do a top overhaul.

Still in dilemma ... Kasi angkat engine first lah then decide what to do.
 

YYC

1,500 RPM
Senior Member
Dec 30, 2007
1,833
939
1,713
Kuala Lumpur
HI bro Danz, you have mentioned the windscreen's chrome strip. What to do about it if it creates wind noise?
 

mkdreamervl

Known Member
Senior Member
Jul 6, 2005
327
32
1,528
PJ
YYC : Checked if any plastic which is a layer covering the chrome strip peeled/sticking out ? If yes just use a blade to cut off the peeling part.