Overhauling and modifcations for ya rx-7 by jap tuner

[lwm495]

Rotary Engines
- Mechanical Turning
- Overhauling Engine (Apex/Side/Corner/Oil seals)
- IN/EX porting
- Customized IN/EX piping
- Upgrading Turbo / Intercooler / Actuator / Wastegate
- Electric Turning
- Fine Tune Engine (ECU, Sub/Full Computer Tuning with A/F gauge
- Dyno tuning

Do around 80% of singapore rx-7 in singapore...
Its just jointly set up by our local garage with japanese guy(software engineer cum tuner) ,who loves rx7 and know them in out! he owns 1 fc and 2 fd's
Dyno machine are coming in too...

we have rx7 water temp 90 degrees with minimal knocking after tracking at sepang.
kindly PM me for more details.

 

[Lennon]

Sounds like another for option rotary head..... Mind to let me know whether this work shop deals with RENESIS engine.....

TQ

 

[lwm495]

Yeah, this workshop till with renesis engine also,
Maybe u should tok to the japanese tuner too...

 

[phat7]

are we talking bout Kaz? he seems very knowledgable.

 

[lwm495]

yep! :)

 

[FD3S]

Rotary Engines
- Mechanical Turning
- Overhauling Engine (Apex/Side/Corner/Oil seals)
- IN/EX porting
- Customized IN/EX piping
- Upgrading Turbo / Intercooler / Actuator / Wastegate
- Electric Turning
- Fine Tune Engine (ECU, Sub/Full Computer Tuning with A/F gauge
- Dyno tuning

Do around 80% of singapore rx-7 in singapore...
Its just jointly set up by our local garage with japanese guy(software engineer cum tuner) ,who loves rx7 and know them in out! he owns 1 fc and 2 fd's
Dyno machine are coming in too...

we have rx7 water temp 90 degrees with minimal knocking after tracking at sepang.
kindly PM me for more details.

Do you mind to share with us the location of the new shop opened??? Appreciate~~!!!

 

[Alchemis]

Kaz... where ? Johor ? assuming that bcoz he rebuilds so many singapore cars as what you mentioned :)

within our group we have rebuilding experts as well :)

 

[phat7]

kaz is a really friendly and helpful guy. He specialises in ecu programming i think. he also drives an fd. please send my regards, say dave says hello.

 

[lwm495]

sure.. u are dave from?

 

[phat7]

i organise the trackdays at sepang.

 

[lwm495]

sure! tml i will be going down to look for him. will let him know den..
cheers!

 

[Alchemis]

hmmmm during track days.....there's only one guy from singapore that looks like japanese and drives FD... i think i see him before..... hmmmm good idea to start a business when there's alot of knowledge.

:)

 

[jasonlel]

What's his charges in rebuilding RE?

Any address and contact no. ?

Rotary Engines
- Mechanical Turning
- Overhauling Engine (Apex/Side/Corner/Oil seals)
- IN/EX porting
- Customized IN/EX piping
- Upgrading Turbo / Intercooler / Actuator / Wastegate
- Electric Turning
- Fine Tune Engine (ECU, Sub/Full Computer Tuning with A/F gauge
- Dyno tuning

Do around 80% of singapore rx-7 in singapore...
Its just jointly set up by our local garage with japanese guy(software engineer cum tuner) ,who loves rx7 and know them in out! he owns 1 fc and 2 fd's
Dyno machine are coming in too...

we have rx7 water temp 90 degrees with minimal knocking after tracking at sepang.
kindly PM me for more details.

 

[jasonlel]

Any update on this? Would be interesting to know more....