Reply to thread

What I actually meant is...

First point:

There is no need for you to split the signals from the HU. I believe your amp has a setting to set whether the input is 2 channel or 4 channel.


Second point:

By referring to the link provided by DJThoRmented, it seems that you will need DVC subwoofers to have a 4ohm load per channel.

as per link DVC x 2.

I am assuming that the link above is only showing one channel.

As you can see, on option 2, the total impendance is 8ohm. Since you plan to bridge it, I think it will be ok.

Can you please provide the model of your amp so maybe we can review the specs and know what setting or configuration is better.


Hope this helps.


The Marketplace Latest

Posts refresh every 5 minutes

Road Show: SiChuan 815 Concert 02/08/08 Saturday
Dear all members,

There will be a charity performance show and concert of " There are loves on earth, great love is boundless " held in Arena of Stars at the Genting...​
Waja PW Regulator
Anyone out there DIY in replacing the front door PW regulator ?
Mind to share some info.
:X-:
What is the normal Water Temp?
Mine is lingering around 91-92 degrees celsius..
sometimes when idling can go near 98...
these figures based on aftermarket gauges..
the stock meter dial never go more than half...hence i think its not working..

any...

Recent Posts

Search

Online now

Total: 2,373 (members: 1, guests: 2,372)

Enjoying Zerotohundred?

Log-in for an ad-less experience