Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="DanzEterna" data-source="post: 4272048" data-attributes="member: 57656">anyways here the story goes,was in court at 9am, in this room with about 15ppl, all waiting for hearing.....my turn was at 10am, we sat down....bla bla bla....then the president told me that i can only claim the rm2.5k for the engine part only....she told me to get another mechanic to see wat are the faulty parts of my engine, but i told her, there is nothing much problems on the engine side,the problems are at the undercarriage, clutch plate, dashboard etc.....so ok, she said, in that case, if i wanna claim wat the mech had done that caused my parts to be faulty,i have to file a case at Mahkamah Majistret Civil in Jln Duta.....i said i will do it, she asked me, is the amount more than rm5k or less?i said more than rm5k, she said i might to have to employ a lawyer or might not.i said alright......then she said will batal my case at TTPM.later after that i straight away went to Mahkamah Majistret Civil....turun naik the building looking for the right counter..all the ppl there give wrong info....damn..!!....last2 i found it......i told the reception i wanted to file my case, told her the story, she asked me will the claim be rm5k or more?i said its more, the exact amount rm9.6k, she said..OOOO...like that u must fill in the form according to procedure & get a lawyer to rectify it, i said if less than rm5k pulak? she said no need to employ lawyer, just fill in the form ....i said ok...after i fill in the form...i passed it to her with the related documents.....she said, could i come back on thurs cos the person in charge on leave.......damn again...."think i got no work to do ah?"...i didnt say that, i told her i am going outstation till next week...she said ok, i submit to her, she will pass it to the person on thurs....after that i got out from the court, outside there were alot of photographers...so i asked wat was happening, they said Anwar Ibrahim case in proceeding.....hehe...I went home makan, then went to my workshop (another 1, not the stupid Din Mez)....to change my spark plugs,cos my car was jerking.....when the mech opened the plugs & showed me, guess wat, ..i was right....my plugs was changed.. it was NGK R plugs (rm20 for 4pcs type, used on iswara, wira 1.3),i was like wtf man....before this i was using (bosch fusion iridium that costs me rm200) WTF man....summore can change my plugs, dunno wat else they change....bloody f**K man....even my new mech also wanna tiu kau him.....when everyting was done, i went home, with anger...feeling like wacking the bugger....!!</blockquote>

Verification

The Marketplace Latest

original rare Yokohama ADVAN Racing RG3 18x8 18x8.5...
- Started by david tao
- Chassis and Wheels
original Endless M4 S2 4pot 2pot brake caliper set...
- Started by david tao
- Chassis and Wheels
original rare Yokohama ADVAN Racing RG2 17x8.5jj...
- Started by david tao
- Chassis and Wheels
original rare WedsSport TC005 17x7jj offset +40 5H...
- Started by david tao
- Chassis and Wheels
Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

[ASK/HELP] turbo fan + bigger intake to air filter = better performance & FC?

Hi guys,

this is my very first thread in this forum, pardon me of my 'non automotively' languange coz i'm not as good as you all sifu's.

i'm driving a proton exora. As you guys might know, exora is taking air...

Need some advise from Airtrek Turbo

Hi all, I was thinking of to get a Airtrek Turbo. But before that i wish to know fews points as below. Hope able to get some advise.

- Fuel comsuption?
- High maintainece?
- Spare part available?
- Any problem with...

Question on AFC Neo/E-Manage

Greetings everyone.
Have a question here on APEXi AFC Neo. Can it be installed on a 5AT Altezza? any benefits/improvements of using it? I have an unused Greddy E-Manage which William told me that it is not advisable...