Mazda/Ford Owner.

[maf7]

especially Just for mazda/ford owner would share anything bout this car..
hehehe...

 

[ART///SPEED]

our project mazda 13b install at starlet old school

 

[rajie]

wow that will be a powerfull car.................. long live mazdaspeedd

 

[azameel]

guys
does anyone knows the original exhaust pipe diameter for b6t?

 

[maf7]

i've use b6t before..
as i know original diameter for b6t is 2 inch..
i use 2.5 inch before... so far so good...
until i upgrade the engine.. than change to 3 inch..
as u just doing minor mod 2.5 inch i think good already...

 

[dek_ang]

whats exhaust pipe diameter suitable for b8 180 engine??tq..

 

[maf7]

normally b8t user make 2.5 to 3 inch...
most 3 inch..
as my knowledge...

 

[dek_ang]

ive one ford with bpt engine..and that engine still standard...if i want to upgrade mycar, which part i must start?tq..

 

[maf7]

what else have u done to yur car??
are the engine really stock standard?

 

[dek_ang]

ya really stock standard...even air filter also standard...

 

[maf7]

1st step..- change the air filter, blow off and exzos pipe (3inch all over and n1 style muffler)..
2nd step- change fuel pump(more powefull pump coz u up the boost-this will make sure yur engine have enough fuel..
-fuel regulator.(to set the fuel capacity)
3nd step- EBC electronic boost controller... or maybe cheap way tulang ikan... hehe..

all mod up there are depend on yur pocket la... i think after done all up there u'll fell the differents.. trust me.. safe boost i think 1bar is enough for standard turbine that is vj20.. happy modding

 

[dek_ang]

thanks dude...
can i ask more?how muck +- budget to apply all step for my car??
izit less than RM500 or more than that?
ive got blow off already..

 

[rajie]

1. walbro fuel pump RM500.00
2. Air fliter RM250 and above depending on the brand
2. 3"exhaust around RM400 and above
3. muffler RM 300 and above depending on the brand
4.fuel regulator RM350 and above get sard or FSE
5. boost controller electronic wan will cost RM300 and above tulang ikan RM8 bucks
6. SAFC 5 button RM380 SAFC blue screen RM450 and above
7. vr4 450cc injectors RM200 to RM250
8. dyno tune RM100 - 150 depends where in sunway

with all this u can boost ur B8 till 1.2bar with the VJ20
currently this is my set up and im getting 210whp

 

[rajie]

all this mods will set u back more than RM2k bro ... i know its a lot of money
but once u start playing cars there is no end to modding ur car bro and there is no cheap cheap way to do car

 

[dek_ang]

thanks dude for nice calculation......i will do step by step.....dun have much money to setup all this at the same time.....and 1 thing i want to know,have any effect or not if i change standard intercooler to big intercooler??at the same time my engine still stock..tq..

 

[maf7]

u'll have turbo lag for sure...
but still when enough air compress will be better than standard intercooler...

1. walbro fuel pump RM500.00 - can use other like RB26 or sr - 200++

2. Air fliter RM250 and above depending on the brand = find at chop shop bout 200

2. 3"exhaust around RM400 and above - depend on shop as i make before just 280

3. muffler RM 300 and above depending on the brand - this one depend on yur taste... i use nur spec before.. (350) now use hks ti

4.fuel regulator RM350 and above get sard or FSE - at that price

5. boost controller electronic wan will cost RM300 and above tulang ikan RM8 bucks-if u get 300 just grab it.. it's good price.

 

[rajie]

if ur looking i got some of the things with me

 

[dek_ang]

what of things u got bro??

 

[initial_r]

hi i'm driving a Ford laser S twin carb.. still stock... any1 know where can get B6T and whats the price now for it??

 

[dek_ang]

hi i'm driving a Ford laser S twin carb.. still stock... any1 know where can get B6T and whats the price now for it??

just go to BPT or BPD i think...