Jazz Vtec Bodykit Type-s

[orakle]

if it was black then its worth ur price there's noneed to spray it...

I think if spray also still cheaper than outside.
Spray RM400 + Kits RM600 = RM1000

Installation no sealant required, only need double-sided tape. So it takes less than RM50 to install it.

Outside selling RM1300 to RM1400 w/o spoiler.

Cheap leh.

 

[orakle]

< B U M P >

 

[crazyazim]

I think if spray also still cheaper than outside.
Spray RM400 + Kits RM600 = RM1000

Installation no sealant required, only need double-sided tape. So it takes less than RM50 to install it.

Outside selling RM1300 to RM1400 w/o spoiler.

Cheap leh.

i've got mugen bodykit, my front skirting is crack and need to be replace...

i was thinkin of change one set... i dont mind fiber for side and rear but front

skirting its a must for pu... if any one have full original pu body kit + its

original honda black it'll be supperb...

then it would be great..

 

[orakle]

i've got mugen bodykit, my front skirting is crack and need to be replace...

i was thinkin of change one set... i dont mind fiber for side and rear but front

skirting its a must for pu... if any one have full original pu body kit + its

original honda black it'll be supperb...

then it would be great..

Jazz VTEC bodykit is higher off the ground than Mugen.
So fiber also should not be a problem boss.

Me myself also driving Jazz and using the same fiber Jazz VTEC bodykit, so I consider know a bit lor. :)

 

[crazyazim]

Jazz VTEC bodykit is higher off the ground than Mugen.
So fiber also should not be a problem boss.

Me myself also driving Jazz and using the same fiber Jazz VTEC bodykit, so I consider know a bit lor. :)

can i get the front skirt only?

 

[orakle]

can i get the front skirt only?

Front skirt only?
Your car will look very weird wor.
Thin lip in front and thick skirts on side and back.
You sure u wanna do that?

 

[crazyazim]

Front skirt only?
Your car will look very weird wor. You sure u wanna do that?

not so bad i guess mine is black bater then nothing infornt i gues...

 

[crazyazim]

if you wana sell how much is it going for "front skirt only"?

do you know how much does the mugen bumber cost? do they have the plastic pu ones?

 

[orakle]

not so bad i guess mine is black bater then nothing infornt i gues...

It really makes a difference, crazyazim.
Just imagine high off the ground in front and very low at the side and the back.

Jazz vtec bodykit is those like gentle and nice type meanwhile Mugen is belongs to those garang type. If mix, it will not look good from the side wor. U imagine and think about it first ok then let me know. Dun regret later.

 

[crazyazim]

It really makes a difference, crazyazim.
Just imagine high off the ground in front and very low at the side and the back.

Jazz vtec bodykit is those like gentle and nice type meanwhile Mugen is belongs to those garang type. If mix, it will not look good from the side wor. U imagine and think about it first ok then let me know. Dun regret later.

mine is black with te37 bronze color it does look garang.. i figure.. do you know any one selling the front skirt only then...?

 

[orakle]

if you wana sell how much is it going for "front skirt only"?

do you know how much does the mugen bumber cost? do they have the plastic pu ones?

Frankly speaking, I dunno how much to sell just the front skirt. I also want to help you solve your problem but not sure how I gonna sell the side and rear skirts w/o the front. Like selling tail and body without the head. Hope you understand.

Mugen Pro bumper no PU/plastic for replica at the moment in market. only fiber now. Cost is around RM300 - 400 in the market without spray paint yet.

 

[orakle]

mine is black with te37 bronze color it does look garang.. i figure.. do you know any one selling the front skirt only then...?

Since u asked me this question, I assumed that you already did some survey outside that nobody sells just the front skirt rite?

 

[crazyazim]

Frankly speaking, I dunno how much to sell just the front skirt. I also want to help you solve your problem but not sure how I gonna sell the side and rear skirts w/o the front. Like selling tail and body without the head. Hope you understand.

Mugen Pro bumper no PU/plastic for replica at the moment in market. only fiber now. Cost is around RM300 - 400 in the market without spray paint yet.

the problem with that is the whole bumber is fiber...

i have problem to sell my side and rear since i broke the front part...

i was thinking of getting ken style but then what im going to do with mugen
with out front skirt ;)

ur driving jazz as well is it?

 

[orakle]

the problem with that is the whole bumber is fiber...

i have problem to sell my side and rear since i broke the front part...

i was thinking of getting ken style but then what im going to do with mugen
with out front skirt ;)

ur driving jazz as well is it?

Yes sir, I'm a Jazz proud Jazz owner like u too.

Get the Jazz vtec kit from me lar. Letting off at very-very cheap price alredy. I'm not making any money here. Just lend my fren a helping hand only. He also rugi a lot selling off (more than 50%) using it just a month only.

 

[orakle]

< B U M P >

 

[orakle]

< B U M P >

 

[orakle]

< B U M P >

 

[TheExtreme]

What is the color ?

 

[orakle]

What is the color ?

silver, sir.

 

[orakle]

< B U M P >