Reply to thread

oi escaflowne!


ONLY the steering wheel man!

no need the knee part.....!


remove the horn first,

make sure your wheels are pointing straight.

theres a big nut (about 19mm-21mm) in the center, remove via tyre cross wrench.

it should come off, but hit it if you need too.


install the new steering wheel onto the bosskit.

tighten all bolts in a cross pattern fashion. (just like tires)

install wheel+bosskit onto the spline (the rod with teeth)

and make sure the wheels about straight, install the nut about 2 turns, and go and drive to make sure the wheel's straight. If not straight, remove nut and 'tune' till straight.

once straight, tighten nut.

install horn button :)


Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience