hondata+skunk2 stage 2 cams tuner in traffic jams, any good tuner in penang?

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search
Chill bro. Every Honda user wants Hondata but you wanna sell it off? Cars surely got problem plus our cars are old dy. Reaching 20 years already. Just take a drive to KL and get it done once and for all. I'm sure people here can recommend you an honest tuner.

Anyway, what else you wanna sell besides Hondata? Hahaha....
 
sabar bro, powerful engine sure kuat mrajuk punya, mcm awek yg cantek tp byk karenah..hehe
 
Chill bro. Every Honda user wants Hondata but you wanna sell it off? Cars surely got problem plus our cars are old dy. Reaching 20 years already. Just take a drive to KL and get it done once and for all. I'm sure people here can recommend you an honest tuner.

Anyway, what else you wanna sell besides Hondata? Hahaha....

i look at the geran kereta, the car engine has been swaaped in 2009..and i manage to call the ex owner..he spend around 25k already upgrading that car..fully build..(theres lots of stuff inside it..including mugen jasma full including piping to mugen twinloop)..and that car is quite fast as well..i dont meant to brag,but golf gti and caldina gt4 seems is not a problem anymore..and once i cucuk angin..aston martin vantage from juru to taiping doin 180kmh(gps shows 200++)...it seems to be quite healthy at high speed..

but,, ini adalah umpama memberi kereta lumba pada seoarang yang berjiwa pakcik.huhuh..i dont need that kinda speed..i want it to be drivable on the street..and a pleasant cruiser..i bought this car because of the size,then i see the f20b engine..if b16a is good,mesti f20b is extra gooder..hah..later on after one week of owning..the car jams(valve lucut pada kelajuan 70kmh gear 3)..and it took 2 months to fix(part ordered from america,they say)..at that time memang nak jual..now after 2 months..the car gimme headache again at low speed..cannot tahan loh..

if i want to sell the engine part..i dont want to sell it sikit2..just gimme original s86 engine, and tukar suka sama sama suka tapi topup sikit arr .if not sel off the whole car lar..im better off with camry.or any other 2.0 cruiser.

takboleh tahan
1)barang2 honda halfcut ni mahal
2)minyak dia dalam bandar 7km/liter
3).nak cari tuner yg jujur dan mahir.
4).nak cari masa untuk #3
5).selalu dok risau takut pencuri geledah kereta.
6)exhaust mugen twinloop tu bising bila cruising..so, masa kat highway dengan family..bawak 100kmh je,kalau tak bini bising.

yang syok.
1.torque dia.(bila dyno,graph dia malar..takda surge kat vtec point..),tapi in streetdrive,vtec dia "melompat"
2.rpm 8/9k.
3.kereta2 lain makin kecil di cermin belakang

zaim really did a good job,but to the wrong person..hehe
 
I envy your car la bro... hehe
 
hehehe no need to envy lah..last month im rm1500 poorer already(tuning+speed sensor+timing belt change+drivesahft thingy).. only god knows whats next..
 
What to do? Monster like that, what to expect? Hehe. Is it your DD? Mind to tell dyno figures? Just curious about F20 cause not many that I know mod this engine.
 
What to do? Monster like that, what to expect? Hehe. Is it your DD? Mind to tell dyno figures? Just curious about F20 cause not many that I know mod this engine.

yup my DD,(well,i only have one car..i use my kapchai mostly..use my car 4 hari sekali like that just to panas the engine)..

my dyno max whp at 188whp at 7.3rpm,max torque is at 19.38nm at 5.8k rpm..im using ron95..

but zaim told me that my car was street dynoe at 203whp..i dont know which one is the correct one..

ps;nanti kalau saya dah pandai upload gambar saya load dynosheet..
 
my suspect is the aggresive camshaft settings... not just the tuning for your poor idling issue.
re-adjust the cams to your driving style and re-tune your hondata. however, these will may reduce your peak/highest horsepower readings on dyno. But the target is that you can drive during jams and still overtake caldina gt4 if you wish. good luck!
 
yup trying to get the best of both world,and i realy dont mind sacrifising peak power.the most important thing to me is reliability.

im trying to source out the timing belt cover as well..they cut it already,
 
Top Bottom