Honda City

[MonkeyDLuffy]

dear Team CT,

just arrange to get my new bodykit for my CT....

plan to get a full set wide bodykit, but too expensive lah....

will get this soon, pic attached !!!
contacted the seller in singapore liao !!!

hehe

hey tommy,
cant deny it..this is the most garang kits for CT atm. Mayb i'll change mine too after a year or two..till then i'll juz stick back to my so called Mugendulo (Mugen+Modulo) as addressed by most members here. muahahahaha. Remember to inform me when u goin BKK, ok?

marlboro,
email received. thx

fooken,
show us ur rims lah......

jackie,
UGPM :)

 

[honda6831]

just reach office.... one hour plus man....damn long journey from banting to KL

thanks raymond & alex all the way to my factory for lunch, looking foward team ct can organize a convoy to klang for seafood lah....
cheap and nice lah...!!!

hehe...

cheers,
honda6831

 

[honda6831]

hey tommy,
cant deny it..this is the most garang kits for CT atm. Mayb i'll change mine too after a year or two..till then i'll juz stick back to my so called Mugendulo (Mugen+Modulo) as addressed by most members here. muahahahaha. Remember to infrom me when u goin BKK, ok?

i think will quite impresse all ct owner if I put this kit ahh....

dont worry man, will inform everyone when theres a trip to bkk for the car cosmectic and also the thai chick there lah....

fun lah !!!!

cheers,

 

[MonkeyDLuffy]

MonkeyDLuffy,
I think most workshops in Sunway would be able to help you out with the installation. It'll be better if you can call up Marlboro and ask him about it.. he knows the place there better :p price should range around RM50 for installation of the meters.

thx jackie for da info. RM50 for 3 meters...fast fast go loh..no need to think :)

Marlboro or Tommy,
U got any lubang where to install these auto gauge meter? i want those experienced ones loh. can ask for me install 3 meters how much ar?

 

[Marlboro]

thx jackie for da info. RM50 for 3 meters...fast fast go loh..no need to think :)

Marlboro or Tommy,
U got any lubang where to install these auto gauge meter? i want those experienced ones loh. can ask for me install 3 meters how much ar?

try to go the shop next to N1 racing... called Excool...if i'm not mistaken they are good...shouldnt expensive around rm60 to 80....mkt price.

 

[honda6831]

thx jackie for da info. RM50 for 3 meters...fast fast go loh..no need to think :)

Marlboro or Tommy,
U got any lubang where to install these auto gauge meter? i want those experienced ones loh. can ask for me install 3 meters how much ar?

Can go Amoil too, look for Jacky,H/P :0122113612

they used to install in my few cars like perdana, lantis n my ct.....like the Oil Press, Boost, Oil temp, RSM, exhaust temp,water temp & etc....their workmanship quite reasonable....

hope this help !!!

cheers,

 

[Marlboro]

hellllooooooooooooo.....
how come nobody 1????????

 

[fooken]

Dear Team City, I'm officially been pimped and the newest adik beradik gang of Works Emotion. though still not really satisfied with the look of the car cause the stock spring is high, fit my whole hand! calvin's ride two finger only at the front gap! can i just cut the front stock spring shorter? hmm im confused to say itz nice or weird. hahaha :P


Before
http://i6.photobucket.com/albums/y214/fooken/HondaCity/Image010.jpg.

After

-weird-

 

[fooken]

Now my bodykit looks tame.. last time with the std rims itz nice n simple.. now wanna say garang also not garang, nice also not too nice edi..

anyways going for Star Wars Premier at Mid Valley later@8pm
woohoooo! join the dark side rims!

 

[MonkeyDLuffy]

fooken,

haha welcome to club emotion....:)
nice rims.....whats da damage leh? what tyres u choose?

Add eyelids n grill look more cantik loh. heheheh all got poisoned by me.

:( i m only goin for tomolo nite show.

 

[Noob]

sad case..

hey guys.. was reversing the car today n accidently hit the parking ticket machine.. freaking blind today.. dono how it happened.. damn sad now..
the back of the car is a lil dented.. any1 knows a place that's nice and cheap to knock it back? workmanship comes first..

 

[Coconut]

tommy : u ask la your fren who is from CHS last time in secondary school, the one my frens ex-bf his name is ah-fook, but i know he is not from sunway college la...

wei u 2002-2004 also in sunway ar? so u also around same age as me la? me 2001-2003 in sunway monash also la

jackie : i also wanted to come for the convoy la, havent test my car before and those mountain road, but like u say lor, have to make $$$ to mod car ma, unless my company dun have electricity on that day la :D

fooken : 16" rims ar? 45 series tyre?

guys wat is a decal? is it like a sticker stick on windows? oor stick on car? looks nice ler the decal..

 

[Jackie Leong]

dear Team CT,

just arrange to get my new bodykit for my CT....

plan to get a full set wide bodykit, but too expensive lah....

will get this soon, pic attached !!!
contacted the seller in singapore liao !!!

hehe

http://gallery.guritom.com/albums/userpics/10804/normal_hansolo26.jpg

arghH!!!

bro.. why sometimes our idea clash one ah? wide bodykit .. then since found out from you it's damn expensive, i was thinking of customizing my front bumper as the pic you attached! the singapore 9606 blue twins, one of them have this bodykit right? (before that i was thinking of using fit dynamite's bumper as reference to customize my front bumper)

arghhhh!! but please let me know the damage for this bodykit k? if it's a reasonable price.. then probably i'll drive my car down when i'm ready for the bodykit! :(

bro.. i was in Sunway College in 2003 in MUFY.. 2004 already in Monash University.. what i drive, nothing to shout about.. all stock cars :p

 

[Jackie Leong]

fooken,
16 inches really not big not small leh.. don't cut your springs man, just bear with it till you can afford the lowering springs :) i consulted alvinsiow regarding his rims liao.. eyes almost bulged out :p

Noob,
wah lao.. why so careless geh? be more careful next time man.. just wondering which and what part of your car is damaged? a picture would be more helpful.. if just the bumper, then i guess better solution would be to just polish/wax it up lo.. cuz if you send it for repair (if i'm not mistaken it's not fiber material) they will most likely use a hot gun and push the part back out then respray the whole rear bumper.. cost won't be cheap.. so no point doing it at all.. and even if you did, it will not be nice.. it will be wavy..

 

[sonictheory]

today kinda soi (unlucky) lah...was accelerate all the way back to klang in kesas..press press...then suddenly i come into a wira...and almost tailggating him...then i find him not giving way, so no idea lah...cut from left...then makan balik...who know this fella accelerate and tail me back...then i got no idea lah, give way, then look at him...fark! it was a police with uniform...then step abit brake guai guai follow his back nia...wonder how he find out so many power since i edy run up to 160km/h...atleast he also 180km/h...guess it's mivec engine under the hood with stock look ...then come to a conjunction, was waiting for traffic light, he stop behind me, then alot of car cutting que, he (the police) started mad, open door and scold 9 the person...lol...i just treat like i got nothing wrong also...dun care..just scare the love letter -_-"


monkey, is it the lid is the one u posted in earlier page, which is unpainted?...if so how come i see no much diff with JE one? later i post back if i want one...wanna check it out firs...

fooken, how much u got ur stock rims traded in?

marlboro, the front windscreen sticker (mugen wording) is around rm30 izzit with installation?..plan wanna install when i'm free..

jackie, how come their mugen loop is more expensive ? -_-"...if like that ar...better go take the stainless steel tupperware from my kitchen and cut a hole then weld on the exhast better...shininig somemore and garang also...

 

[Jackie Leong]

today kinda soi (unlucky) lah...was accelerate all the way back to klang in kesas..press press...then suddenly i come into a wira...and almost tailggating him...then i find him not giving way, so no idea lah...cut from left...then makan balik...who know this fella accelerate and tail me back...then i got no idea lah, give way, then look at him...fark! it was a police with uniform...then step abit brake guai guai follow his back nia...wonder how he find out so many power since i edy run up to 160km/h...atleast he also 180km/h...guess it's mivec engine under the hood with stock look ...then come to a conjunction, was waiting for traffic light, he stop behind me, then alot of car cutting que, he (the police) started mad, open door and scold 9 the person...lol...i just treat like i got nothing wrong also...dun care..just scare the love letter -_-"


monkey, is it the lid is the one u posted in earlier page, which is unpainted?...if so how come i see no much diff with JE one? later i post back if i want one...wanna check it out firs...

fooken, how much u got ur stock rims traded in?

marlboro, the front windscreen sticker (mugen wording) is around rm30 izzit with installation?..plan wanna install when i'm free..

jackie, how come their mugen loop is more expensive ? -_-"...if like that ar...better go take the stainless steel tupperware from my kitchen and cut a hole then weld on the exhast better...shininig somemore and garang also...

don't worry la.. the police is probably just off duty or going to balai to start his shift.. just the annoyance agitated him la.. chill man, no love letter geh.. if got then just pay lo.. easy come easy go :p

if not mistaken fooken previously said RM600, don't know if he got a higher price for it or not.. either way, delaying my rims for the moment first.. really need to check out the pros/cons with the rest of the members during the convoy.. because changing to nice/good 17 inches rims with good tires minimum budget also almost 3k excluding trade-in..

i don't know why their price is so expensive la, but if they work the same i wouldn't go for it.. might be because of some certification lo.. u try asking la.. if no certification, heck.. i can't be bothered to pay such a hefty price when the others works just the same..

 

[porkchop]

aiyo...... pity u le......just bad lucklo.......some time this things happen

eh tommy u putinng the new body kit looks Good man, sure can catch everyone's eye la.........

 

[Noob]

the police probably lazy to work while being off duty.. heheh.. or else probably stop n ask 4 kopi d gua.. :D

this is what happened to my car.. any shop to recommand? think they can get it back like new ar? hope no scars man..

 

[Jackie Leong]

hmm.. Noob, I think hammering plus spraying that particular part might cost you between 200-300.. that's an ugly dent man.. accident liao, hard to say make it new.. but after knocking that part properly, they'll apply cement and sand it down to surface before spraying a new layer of paint on top of the whole boot lid..

 

[Noob]

sigh.. yea.. damn ugly dent.. heart bleeding like water fall..