Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="burnner" data-source="post: 2374624" data-attributes="member: 48966">hemm...if you jaga elok2....the 2a won't kaput wan....like my 2a after full restoration, change everything from cam bearing to piston ring 100% Japan part, that was year 2003, until now not yet kaput....always travelling with average speed of 110kmj, travelling distance 300km none stop...also still ok....most important thing is don't wait for 5000km than only oil change...change them when its 3000-4000km. Cause we do not know sometime when we are idleing the life of the engine oil also running....kesimpulan....won't kaput wan la....</blockquote>

Verification

The Marketplace Latest

original rare spec Rays Volk Racing RE30 15x7jj...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TE37 SAGA S-Plus...
- Started by david tao
- Chassis and Wheels
original Swift Springs rear strut bar set made in...
- Started by david tao
- Chassis and Wheels
Proton Preve R3 body kit
- Started by jeff6126
- Exterior and Body
Perodua Ativa gear up body kit
- Started by jeff6126
- Exterior and Body
BMW F10 Mperformance front skirt lip
- Started by jeff6126
- Exterior and Body
Honda Civic FC fk7si front bumper set
- Started by jeff6126
- Exterior and Body
brake caliper spray
- Started by jeff6126
- Exterior and Body
BMW F30 M3 bodykit/diffuser set
- Started by jeff6126
- Exterior and Body
Perodua Axia Rahmah bodykit
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

Project Z Week 23: Spare Z31 Chassis

https://www.zerotohundred.com/wp-content/uploads/2011/10/IMG_0437.jpg

I spoke to Rahmat about the condition of our current Z31 and he cites that a lot of work has to be done and may take up to 4 months or more to...

Preview: 2009 Nissan 350Z

http://img57.imageshack.us/img57/2699/dsc0017he7jc8.jpg
http://img252.imageshack.us/img252/8936/dsc0013hs4ey6.jpg

The Nissan 350Z, or ‘Fairlady’ as it’s known in Japan, is set to be replaced by an all-new model in...

Help plss.. just change ecu..

I just changed my Ford lynx 1.6 manual ecu.. and got a mazda ecu from chop shop.. what i noticed after changed the ecu.. timing a bit lariii.. sometime almost down to 0 ... and my car pickup also not so good... when...