Reply to thread

When you check the halfcut that time the sound is it similar? Does the engine shake inside the chassis before conversion ?

Maybe mounting also can happen.

When they connect the halfcut extractor to your existing pipe, got holes or not? After 1 week of driving, jack your car up and fine for black spot along the connection.


What u mean by wiring cannot do well ?

No seat-belt ON ? No door open ON ?


The Marketplace Latest

Posts refresh every 5 minutes

DIY to seal tyre puncture
Have been a long time already, wanted to try DIY sealing a tyre puncture with off the rack tyre repair kit, so recently went hunting for one. There are many at the supermarket, hypermarket going at RM11 to 15 for the...
What causes a turbo to be blown-up?
Hi sifu,

What causes a turbo to be blown-up, is it due to high boost or high flow?

Let's say, for example (only):-

a. The same turbo with 2.0L engine, boost at 14psi, air-flow =...
Seafood Dinner
go the link below for more informations..

http://www.zerotohundred.com/newforums/the-malaysian-skyline-club/242042-seafood-dinner.html

Recent Posts

Search

Online now

Total: 1,068 (members: 0, guests: 1,068)

Enjoying Zerotohundred?

Log-in for an ad-less experience