Fuel Consumption

[Genezza]

Taikors... what's ur tezza fuel consumption ?

mine 5 a/t.. hks drop in filter, s flow muffler..

RM100~105, 390~400KMs... RM0.25/km

Consider good or bad ?

 

[wfhan]

traffic condition also affects FC...
i'm guessing u must be like 60% city & 40% hi-way.. ?

 

[Genezza]

wfhan : 70% city 30% highway i think.. is the fc considered bad ? how about ur ride ?

 

[davidgm16]

you have more city drive.. i'll say this is the expected result...

 

[1JZtezza]

pssst

1 JZ tezza's have same or better fuel consumption(1 full tank=400+ km;with fatter tires!!!) and lots more fun.

 

[Genezza]

1jz : haha.. i wish the 1j is under my ride's hood man..

im gonna change lighter rims with thinner tires..

Altezza ori wheel size is 215/45/17 right?

 

[davidgm16]

pssst

1 JZ tezza's have same or better fuel consumption(1 full tank=400+ km;with fatter tires!!!) and lots more fun.

sure boh.. but i think possible also very hard to get tat result... coz u cannot tahan need to tekan!!! ahahaha

 

[AE111_SEG]

Bro
I do 50% city & 50% highway. I get 450km to 500km. I on average my revs are between 3,000 to 5,000 rpm and occasionally will rev cut at 7,200 rpm,.

 

[Genezza]

AE111 : wah nice FC.. mine MAXIMUM i tried is really 410km only.. maybe my leg is the culprit.. lol..

 

[aycy]

i get 300-320km full tank. with 18 inche and 90% town driving.

 

[AE111_SEG]

AE111 : wah nice FC.. mine MAXIMUM i tried is really 410km only.. maybe my leg is the culprit.. lol..

My ride is 100% stock. Only got K&N internal filter and Dynojet Powercommander III.

 

[davidgm16]

My ride is 100% stock. Only got K&N internal filter and Dynojet Powercommander III.

hey bro.. share the feedback on the dynojet powercommander III? hehehe..

 

[wfhan]

VJ, ... i'm also interested to know about dynojet powercommander III,
a quick search reveal it is more towards bike usage, nvr occurs to me
that it can use on our yamaha 3sge ?
is this it ?
-->
http://www.powercommander.com/powercommander/Images/Products/PowerCommanderIIIUSB/powercommander_iii_usb_and_lcd_unit.jpg
if yes then it's cool.
can get from William ? or other source ? run parallels with stock ECU ?

 

[Greytezza]

VJ, ... i'm also interested to know about dynojet powercommander III,
a quick search reveal it is more towards bike usage, nvr occurs to me
that it can use on our yamaha 3sge

Dynojet started off their product for performance bike and now it is being use for cars also.
Dynojet have been in Malaysia for quite some time now and have been used by other cars and was discussed in some local car forums.
It seems that the feedback mentioned it is better than AFC NEO and E-manage...

William have done a few cars with the Dynojet, so it will be better if you go talk to him and let him explain to you..it is a cheaper option than the PowerFC or TOM's TECII Ecu...

 

[wfhan]

greytezza,
thx!

 

[jasonchee98]

last time... i managed to get 10 - 10.5 km/l on average. 80% highway and 20% city. my leg wise... hmm... moderate. on average speed in highway is around 120 - 140. i felt very slow travelling at 110. felt like driving a slow car. hehe.

 

[rayncc]

Running on Ron97, on avg I get about 9.3L/KM on mix driving, say 50% h/way & 50% city. In perspective, cost about RM0.215/KM (note : last time was about RM0.18/KM on Ron95 but fear long term engine damage)

 

[jasonchee98]

9.3L/KM? bro, u mean 9.3KM/Liter or 9.3 Liter/100KM? just clarification. :)