Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="tingtk23" data-source="post: 1064269274" data-attributes="member: 139061">Hi, I need some advice on my set up. I'm driving a stock Satria SOHC 1.6 Manual Year 1995. I recently did up my exhaust system from one of kweng84's direct branch (Kaki Exhaust) as he told me. He quoted me 380 for a 4 - 1 extractor. After I changed that, I felt like it was nice but I was running still on stock 1.6" piping from front to the back and still on the stock S flow muffler. So i went back there again, but it was because of strange noise I heard from the middle bullet. So i ask them, then they knocked and shake the thing and said inside of the bullet has cracked and if I want to remove the noise I have to change the bullet. So I said, okay change it. After that his worker poison me and say, is it a manual car? I told him yes, and he suggested I change to a full 2" piping from the front to the back. I wanted to keep my budget so I stuck without the muffler and just went with a straight flow right up to a tip which I chose. I told him that my piping must follow original route back because I want to avoid any problem with the authorities with the pipe not following original route. After it was all done, the sound was loud and it was like a track car. I then asked him to fix a straight flow bullet to the back and he chose one of those giant ass one that is as big as a S flow but it is a straight flow, and it was so much more quieter. But now I feel like the car is a bit sluggish. From Gear 1, when I accelerate hardly the power is up to 4500 rpm and after that it felt INSTANTLY sluggish so I had to change gear. But before I fix the Straight flow bullet, it was fine up to 5500 rpm. Redline starts at 6 or 7. This set up has cost a hole into my wallet although Kweng says that a full exhaust set up would cost from RM500 to RM7XX for a full stainless steel but this set up cost RM960.4-1 SS Extractor RM380They charged me for a rubber RM10 when I fixed the extractor.Full 2" SS piping following original exhaust route RM150Flat mouth tip RM120Middle bullet RM150Straight flow at the back RM150.</blockquote>

Verification

The Marketplace Latest

Vifa Speakers Audison Amp
- Started by samuel118
- ICE -In Car Entertainment
original rare Yokohama ADVAN Racing RG3 18x8.5...
- Started by david tao
- Chassis and Wheels
Carbing R35 GTR GTR35 Brake Master Cylinder Stopper
- Started by aycy
- Engine and Performance
GR Corolla Hypertune Bolt On Intercooler
- Started by aycy
- Engine and Performance
Carbing Radiator Reservoir Tank Honda Civic Type R FL5
- Started by aycy
- Engine and Performance
R35 GTR GTR35 Rim Wheel TE37 Track Edition
- Started by aycy
- Chassis and Wheels
Endless Racing Mono6 + Racing Mono4 R35 GTR GTR35...
- Started by aycy
- Engine and Performance
WOT Dual Oil Cooler Kit Civic Type R FL5
- Started by aycy
- Engine and Performance
Mugen MF10 Black Edition 18x9.5J+45 FL5 FK8 Type R...
- Started by aycy
- Chassis and Wheels
BBS RI-A God Spec Civic Type R FL5 18x10j+40
- Started by aycy
- Chassis and Wheels

Posts refresh every 5 minutes

2010 Super GT International Series Malaysia - Day 1 & Qualifying Results

https://www.zerotohundred.com/wp-content/uploads/2010/06/2010-Japan-Super-GT-Day-1-2332-600x398.jpg

Some action shots from todays qualifying session of the Malaysian round of the 2010 Japan Super GT race series...

Setting the new HKS EVC

Anyone using the new HKS EVC boost controller? It is known as EVC 5 or 6. Black with display screen.Apart from Boost A, B and scramble, it comes with other functions like boost offset and quite a few other functions...

Trust intercooler + Autronic ECU

Hi all,

1. USED Trust Intercooler for GTR. Size is 600*100*80, which damn huge and heavy too if you compare it to stock GTR cooler. Price RM1800

2. USED AUtronic SMC RM2500

3 USED Autronic SM2/3 with Autronic CDI...