colt(mirage) from poland

[czarnuch]

Hi, I'm new on this forum.
I'm happy owner of MItsubishi Colt 4g92SOHC(only 121HP).
Now i'm in progres of SWAP to 4g93 and in one I'm trying to put turbo on it.
I'm from poland and thats whole problem .
If i do it , it will be first 4g93T in Poland and i think in europe too.
Already i have head and intake from oryginal GSR , turbo from GSR and engine from killed GTi (whit loom and ECU).

Still looking for pistons from GSR and maybe conrods.

When I'm reading posts on this forum i see 4g92t 4g93t mivec..
In poland i can only think about mivec :(
I think people on this forum can teach me many important things and can help whit many problems, because i'm sure they will apear during SWAP

:) Lucas

 

[8229]

hi...

post ur car picture... over here in malaysia there a lot of part from japan, new or used item u can get easyly... most of us just transplant the whole system, by buying the front cut of the car, then just transplant it to the car...

 

[steven7810]

in malaysia we just buy the whole front part and we transplan into our car. so in malaysia we got alot of half cut shop in whole malaysia. like me i using mivec black top manual gear,
maybe u can go to this web site www.munlee.com.my if i not mistaken spell it,is a halfcut shop and is the largest in kuala lumpur and malaysia i do go shopping at munlee and i also saw some european or uncle sam come and order mitsubishi and honda engine. happy driving and hope u can do ur convertion... steven from kl

Bump: in malaysia we just buy the whole front part and we transplan into our car. so in malaysia we got alot of half cut shop in whole malaysia. like me i using mivec black top manual gear,
maybe u can go to this web site www.munlee.com.my if i not mistaken spell it,is a halfcut shop and is the largest in kuala lumpur and malaysia i do go shopping at munlee and i also saw some european or uncle sam come and order mitsubishi and honda engine. happy driving and hope u can do ur convertion... steven from kl

 

[czarnuch]

I was thinking about halfcut but i can only find it in japane or like you show me here ( i found one in austalia, i was trying to arrange shipping but: engine loom and ecu 3000$ shipping 3 moths and second 3000$ its not for my wallet....
I have engine 4g93: Block is the same as 4g93t, oryginal turbo and complite head is in way to me from australia.
Now i need only pistons and conrodes because i plane to tune in future above 250hp and in serial pistons i will burn holes or i will crash conrodes.
I see my project like this:

Block from 4g93 dohc
head and intake, injectors and else from GSR
pistons and conrodes forged for low compression
ARP bolts for head and crank, metal head gasket
ACL bearings
turbo oryginal from gsr for start
manual gearbox on start FWD from my GLXi (in future whole drive things from crashed evo 2/3 and cornversion for 4x4)
Ecu and ECUMASTER(polish piggy verry nice for tune up - most like stand alone ecu) in future stand alone AEM

Brakes from Galant 2.5v6 2pistons 276mm front and i think serial gti on rear.... but tuned fluid proession controler for rear discs

Now i have done paint job on whole car(black pearl) but still looking for cyborg front lip (side skirts are waiting for mount and rear spoiler also (my project based on CJ spoiler)
15" alloy wheels (i dont whant to have bigger because roads in poland are so pure i have in one year 2 times broken 2 wheels and trashed 3 tires (195/50/15 Toyo TR1)

Inside i have done:
front seats from honda civic typeR black alicante
audio:
pioneer P6000UB
Helix H400
DLS RW10
waiting for Dls UR6i for front doors
When i understand how to put photos i will show my "misio" :)

 

[PocketRocket]

lets have some eye candy on ur ride bro....

 

[czarnuch]

in galery i have 2 photos of my "niunio" they are before paint job today i try to put another from interior and some other :)

 

[KhonBaRot1]

When i understand how to put photos i will show my "misio" :)

u could use ur handphone cam to snap the pics of ur babe,
transfer it to ur pc, either using cable or card reader,
browse to this site :

http://imageshack.us/

just create a free account there.
upload ur pics to ur account there,
paste the img link here in ur post.
then all of us could see how the out come will be.
if u could have the before & after mod pics, it will be great.

 

[czarnuch]

http://media.putfile.com/misio2
Test of acceleration on winter wheels

http://www.putfile.com/pic/7312531/?action=zoom
http://www.putfile.com/pic/7312532/?action=zoom
Dyno run effects (its serial 1.6 SOHC :D )

http://www.fotosik.pl/pokaz_obrazek/5b6fdbcd09c7f032.html
http://www.fotosik.pl/pokaz_obrazek/5b2b32039a08cc83.html
Audio :)

And unfortunetly crash (2 monthhs after paint job guy started on red and thats effect :( whole front of car must be rebuilded- i just fixed a little because guy escaped and i'm still waiting when police will do something....)
http://www.fotosik.pl/pokaz_obrazek/b9043380b6de3612.html
During my work
http://www.fotosik.pl/pokaz_obrazek/e8616dc26b459d74.html
http://www.fotosik.pl/pokaz_obrazek/6c83ba662eac4756.html

And my work :(i'm light designer) blue led light for spedometer and rest of buttons
http://www.fotosik.pl/pokaz_obrazek/7c2125fbfbded505.html