B16B using B18Cr Block!

[bagas]

to all honda sifus...need advise here!
what need to change if wanna to upgrade to B18Cr block?!or just simply plug n play using all B16b parts?
TQ!

 

[Chinoz]

Isn't the B16B already using B18Cr block?

 

[hattech-v]

very pening la the question...

is it u want to stroke up the b16b to bcome b18c or wanna change the b16b block straight to b18cr block?

 

[shiroitenshi]

very pening la the question...

is it u want to stroke up the b16b to bcome b18c or wanna change the b16b block straight to b18cr block?

Eh.. then become destrokerlah.. B16b stroke only 77.4mm (according to a friend). I think it's in the region of 80mm-85mm? lower than B18c, but higher than B16A?

But it could be 77.4mm with longer than B16A rods, since the last time in B16b.. low end torque.. aiyoh!!..

You know the actual stroke?

 

[dc_vtec]

very pening la the question...

is it u want to stroke up the b16b to bcome b18c or wanna change the b16b block straight to b18cr block?

i think he wanna change the whole block.
should b no problem izit?

 

[bagas]

i think he wanna change the whole block.
should b no problem izit?

yes! the whole B18CR Block to B16B...

 

[udengfahlawi]

then no problem lah...just swap the block in....all other things can be used back including the head gasket if it is still ok....

 

[hattech-v]

Eh.. then become destrokerlah.. B16b stroke only 77.4mm (according to a friend). I think it's in the region of 80mm-85mm? lower than B18c, but higher than B16A?

But it could be 77.4mm with longer than B16A rods, since the last time in B16b.. low end torque.. aiyoh!!..

You know the actual stroke?

its 77.4mm

 

[hattech-v]

if stret to change the block shud be no problem. but better change the ecu as well to get the right setting for the engine.

 

[avantasia]

yes! the whole B18CR Block to B16B...

what actually happened to your B18CR block???? hih hih hihhhhh and dun forget to change the B16B ecu instead of swapping to B16B block

 

[hattech-v]

the crank n conrod got aaa? i'm interested to get it.. hehe

 

[avantasia]

hih hih hihh.....dats y i'm ask him wat happend to his block???? muee hee hee hee.....where's my previous crank ehhhhh?????

 

[hattech-v]

ur pevious crank now bcome 1.6 sohc crank edi... haha...

 

[avantasia]

oic.....i understand now!!! u trade in for my new engine ya?????

 

[V8_nutter]

to all honda sifus...need advise here!
what need to change if wanna to upgrade to B18Cr block?!or just simply plug n play using all B16b parts?
TQ!

For what reason u wanna change ??

 

[udengfahlawi]

i think the fella want to change from b16b to b18cR ler....not the other way around....

 

[V8_nutter]

weird modification.

 

[HanafyEG]

just plug in b20b la..ahaks

 

[bagas]

my block still ok..no problem at all...just planning someday might go to plug 1.8 block if have 18cr block...never think about b20b hehe...

 

[avantasia]

ermmm....very fenin question!!!!!!!!