Reply to thread

See what others are reading now! Try Forums > Current Activity

Message: <blockquote data-quote="ikky9mili" data-source="post: 2416707" data-attributes="member: 25943">most errors are when spraying. yall should press the spray nozzle head maximum 1 second and let go. move in a left and right motion while pressing the nozzle and when an area is covered, move over to cover whole area. 2nd and 3rd coat, do the same if u wish to do so. then comes the clearcoat using the same technique. this way u dont get too much spray bleeding down and damaging the overall look. u can buy the same color as ur car color through some hardware shop but small tin and expensive price, around rm15-18. i suggest u find a "steel paint" shop and ask for ur car color code and they will give it to u in the normal tin size (rm20-23)....while ur there, get a rubber/foam waterproof sanding block for your sanding purposes. and the correct version of sanding paper is not those u get in a hardware shop but here. which is, 'kovac' eagle brand waterproof abrasive paper P80 for initial sanding and P320 for more fine sanding...u can get the autocolor cement from a hardware shop. the real process is actually red color cement than yellowish-gray color cement (the steel paint shop mustve got this as well) and lastly "autocolor hard putty" for final coat.when cementing, if say u doing ur mudguard, theres a lining usually on the metal (curves of the car/top half of the mudguard), if ur dents are below that curve, cover that up and cement the whole of the bottom half of the mudguard. this way, after sanding, u get the overall clean shave instead of tompok-tompok due to cover only the dents.hmm... good luck!:P</blockquote>

Verification

The Marketplace Latest

original rare Enkei AME Tracer TM02 17x9jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing TRD T3 16x7jj offset...
- Started by david tao
- Chassis and Wheels
original rare Rays Volk Racing RE30 18x9 18x8.5 5H...
- Started by david tao
- Chassis and Wheels
Nissan Almera Tomei body kit
- Started by jeff6126
- Exterior and Body
BMW F30 gts front bonnet hood with scoop
- Started by jeff6126
- Exterior and Body
Honda Civic FC FK7 SI Bodykit
- Started by jeff6126
- Exterior and Body
BMW F30 msport Mperformance body kit
- Started by jeff6126
- Exterior and Body
Perodua Bezza gear up body kit
- Started by jeff6126
- Exterior and Body
Chrome delete
- Started by jeff6126
- Exterior and Body
Proton Preve spray paint(crystal black)
- Started by jeff6126
- Exterior and Body

Posts refresh every 5 minutes

3sge superchanger

hello. any sifu use 3sge superchanger? i st bolt on biltz superchager. the altenetar belt easy to broke. why?

which is better? r33 gtt or r34 gtt?

which one is better as in overall?R33 comes wif rb25 engine,but r34 gtt got a better body.pls help me? :confused:

Quick Release Steering

Any 1 Use This Cool Thing???

I Bought It N Put In Wira, But Steering A Bit Near To Chest.

Like "janggal" Abit La.
Hehe...
Got To Mod Tapak?? Bost?

Any Cifus Gve Me Idea.

Or Its Normal Like Dat?

Search

Enjoying Zerotohundred?

Log-in for an ad-less experience

Reply to thread

The Marketplace Latest

original rare Enkei AME Tracer TM02 17x9jj offset...

original rare Rays Volk Racing TRD T3 16x7jj offset...

original rare Rays Volk Racing RE30 18x9 18x8.5 5H...

Nissan Almera Tomei body kit

BMW F30 gts front bonnet hood with scoop

Honda Civic FC FK7 SI Bodykit

BMW F30 msport Mperformance body kit

Perodua Bezza gear up body kit

Chrome delete

Proton Preve spray paint(crystal black)

Posts refresh every 5 minutes

Recent Posts

Tire Price list Zth

Paging for Hyundai Coupe owner, CCGT @ 28th May 2005

New GR Yaris Automatic & GR Supra Track Edition Now in Malaysia

2025 Volvo EX90 Wins World Luxury Car Award

Been stalking for 3 years edy

Search

Online now

Enjoying Zerotohundred?