problems on my engine vacuums

  • See what others are reading now! Try Forums > Current Activity
  • Fixed New Thread missing Editor: Hi Everyone, the issue with posting a new thread or a reply that shows a missing editor has been fixed. More updates to the forums will be added on in the coming days, we apologize for the inconveniece this has caused

mrevo

Known Member
Senior Member
Joined
Jun 24, 2008
Messages
86
Points
1,506
I'm driving wira with 4g93t engine. Nowadays my engine RPM is very late to turn down when I rev the engine, seems like the throttle body late to close. the boost meter also late to turn down. anybody knows what happened?
 
yup...some time ago. So, is that must be adjusted again?
 
yup...some time ago. So, is that must be adjusted again?


If TPS had been adjested some time ago, should not a problem.
Just check and see have any leakage on the vacuum / manifold and vacuum hoses.
 
i think throttle body vacuum hose was leak...

I checked the vacuum hoses but no leaking/cracking. Normally, if vacuum hoses leak...the vacum will drop and make the engine RPM unstable.
 
I checked the vacuum hoses but no leaking/cracking. Normally, if vacuum hoses leak...the vacum will drop and make the engine RPM unstable.

If comfirmed not vacuum leakage, just check on ur TPS.
maybe need to recalibrate.
hope can help. Thx.:nurse:
 
I checked the vacuum hoses but no leaking/cracking. Normally, if vacuum hoses leak...the vacum will drop and make the engine RPM unstable.


ok ....how about ur buterfly throttle....clean it....or cek ur fuel setting or cek motor oil....or cluth
 
Last edited:
Thank's to all, the prob is already solved. Actualy, the T joint that jointing the vacuum hoses fro TB, BOV and boost meter was melted and blocked the vacuum towards the boost meter. Now, the acceleration is smooth also can boosting as well.
 

Posts refresh every 5 minutes




Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom