where can buy & install piston for bot??

[veilsideboyz]

i plan to change piston to boOST HIGHER :d ...
anyone plss advice which shop :)
tqtq!

 

[3rd GearPerformance House]

what engine bro?

 

[kidRacer]

i plan to change piston to boOST HIGHER :d ...
anyone plss advice which shop :)
tqtq!

maybe keta sorong bro...he3x just kidding :proud:

 

[veilsideboyz]

zzt231 celica turbo

 

[jinkl]

i plan to change piston to boOST HIGHER :d ...
anyone plss advice which shop :)
tqtq!

no engine stated
no boost level stated
no turbo stated

err if i start assuming it will sure be wrong
i assume

engine 0.3cc
last time boost 0.3 , now want higher 0.4bar la
turbo using td025

 

[khoyos]

no engine stated
no boost level stated
no turbo stated

err if i start assuming it will sure be wrong
i assume

engine 0.3cc
last time boost 0.3 , now want higher 0.4bar la
turbo using td025

0.3bar to 0.4bar no need to change piston

 

[veilsideboyz]

boost 0.6 bar plan to boost 1 bar...
using turbo garret Gt25 :)

 

[Turbomaster1]

bro maybe u can try CA18DET pistons...size is 83mm. lowers compression a bit.....and quite strong too

 

[veilsideboyz]

CA18DET pistons ? from what car ?? how much for it ?

 

[Turbomaster1]

nissan 180sx....u can probably get from a perfromance workshop or chop shop....no need get new....used will do.....new also got i sell but price not sure....under 1 k kua....

 

[veilsideboyz]

nissan 180sx piston confirm can fix my car ??
thaknss bro !! :)

 

[3rd GearPerformance House]

from my tuning for 3s celica turbo.stock engine can go up 1.8bar boost but u have change the injectors and fuel pump.

Bump: It's the 2zz engine?

 

[Turbomaster1]

get some info on the pistons on the net.....most importantly the piston pin bore size....compare both sizes....if 1mm difference or same then can fit......but u also have to look out for the piston skirt does not hit anything in the block.....otherwise you have to machine some part of the piston skirt......

 

[alex5718]

0.6 to 1.0bar wat for change pistons? put in management will do thou.

 

[vteckiller]

wesico forged piston

ready stock...
RM2200

 

[veilsideboyz]

vteckiller.......
RM2200 include install ?? :)
3sgte engine not same 2zz engine...
2zz is N/A engine.... 190 on engine...
3sgte already is turbo engine .. 280hp on engine...

oh ya...
if i change wiseco piston then boost around 1 bar or above.. by using turbo garret GT2510..
is it ok ??
i scare turbo will blow ....

 

[jinkl]

vteckiller.......
RM2200 include install ?? :)
3sgte engine not same 2zz engine...
2zz is N/A engine.... 190 on engine...
3sgte already is turbo engine .. 280hp on engine...

oh ya...
if i change wiseco piston then boost around 1 bar or above.. by using turbo garret GT2510..
is it ok ??
i scare turbo will blow ....

without install of cos
rebore around 100-200
opening up ur engine by ur mech 300-1000+

 

[veilsideboyz]

you mean if wanna install piston...
total should be around RM4xxx ??

 

[allance]

hey! bro, u want to made ur car FLY ah...!
i support u !#turbo jet celica#:stupid:

 

[veilsideboyz]

haha ! dont kidding la..
allann :)