Fujimi 1/24 Lancer Evo 9 Ralliart

  • See what others are reading now! Try Forums > Current Activity
  • Search function more powerful with google results! Try Search

ben_gsr2s

Known Member
Senior Member
Joined
Apr 3, 2005
Messages
328
Points
3,018
Location
Offshore
Hi..

This is my first post here.. it is a Lancer Evo 9 Ralliart.. built it box-stock

Mitsubishi%20Lancer%20Evolution%209%20tuned%20by%20RALLIART


Finished the car yesterday.. i have a lot of pict.s but too bz to do WIP :sleep:

more to come...

C & C welcome :biggrin:
 
Basically, it is 'improved' fujimi kit if you compared it to earlier model/kit... my first build was Fujimi Interga DC5 and it was a total DISASTER... i have a problem with fitting and the rims supplied seem too small...

In this kit, the rims supplied is 'up-to-the-spec'... i only find a minor fitting problem at the end of the built...

enuff talking... here goes the pict.s

Mitsubishi%20Lancer%20Evolution%209%20tuned%20by%20RALLIART

Primed exterior.. using white (i think u/coat white) from m/cycle spray can :eek:

Mitsubishi%20Lancer%20Evolution%209%20tuned%20by%20RALLIART

front view of primed exterior
 
Completed underbody... here you can find lack of detail unlike Tamiya.. and no-so-good thing about Fujimi's Evo is, Evo 4,5,6,7,8 & 9 share the same underbody :banghead: .. if you happen to built Fujimi's Evo, you'll understand

Mitsubishi%20Lancer%20Evolution%209%20tuned%20by%20RALLIART


sorry for the blur picture.. taken using my hp camera.. i decide to make it box-stock..

Mitsubishi%20Lancer%20Evolution%209%20tuned%20by%20RALLIART


Orignal rims come all black.. i decide to paint it red around as the box picture
 
Hi..

amm.. it seems like dat la.. that is my first attemp to, there's a bit imperfection here and there...

i mask the rims with tamiya masking tape and paint with brush using Tamiya Acryulic color...
 
Hi All,

Thanks for the feedback..

Sorry for lack of updates.. currently being very bz with offsite project until Hari Raya :banghead:

Will post and update later..

Currently i'm building NISMO GT-R LM LeMans Contender (bought from ayoi84) piece-by-piece.. progress is very slow :confused:
 
Currently i'm building NISMO GT-R LM LeMans Contender (bought from ayoi84) piece-by-piece.. progress is very slow

heheheheeh for display purpose on hari raya ker???
i'm also rushing to finish my z-tune and aoshima r34 top secret b4 raya :p
 
heheheheeh for display purpose on hari raya ker???
i'm also rushing to finish my z-tune and aoshima r34 top secret b4 raya :p

ayoi.
i'm already finished building the GT-R LM... unfortunately :banghead: i have a problem with the decals... all the front bumper decals were destroyed during the clear coating :banghead: :banghead: my mistake...

so i've decided to finish-off the project by combining GT-R LM decals with Fujimi's E7 Tein decals... The result: NISMO GT-R LM TEIN :hmmmm: :hmmmm:

and one more thing..

i like to post some more pict.s of this Evo 9 Ralliart but i have a problem with photobucket... anyone know where else to upload pict.s?
 
ayoi.
i'm already finished building the GT-R LM... unfortunately :banghead: i have a problem with the decals... all the front bumper decals were destroyed during the clear coating :banghead: :banghead: my mistake...

so i've decided to finish-off the project by combining GT-R LM decals with Fujimi's E7 Tein decals... The result: NISMO GT-R LM TEIN :hmmmm: :hmmmm:

and one more thing..

i like to post some more pict.s of this Evo 9 Ralliart but i have a problem with photobucket... anyone know where else to upload pict.s?

post ur NISMO GT-R LM TEIN and evo 9 ralliart lah bro.. hehehe im using imagecave.com :)
 

A thread every 60 seconds


Search

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience
Top Bottom