Sidebar

Swapping Mazda 3 1.6 engine to a 2.3 engine

J

jujitsuka

Junior Member
Senior Member
Jun 11, 2007
7
0
1,501
Hi Bros,

Anybody got a good workshop to recommend within the states of Johor to Selangor for swapping of engines? I am looking at swapping out my MY 2008 Mazda 3 puny 1.6 litre engine to a 2.3 litre engine.
 
vr2turbo

vr2turbo

((( God Level 30,000 RPM )))
Helmet Clan
Moderator
May 11, 2010
30,001
8,385
1,713
Petaling Jaya
Izso said:
I thought that law only applies to Protons?
Click to expand...
All cars and in Proton case cannot change to 2.0L even though within 25%, except Perdana and Inspira, because they already have 2.0 in the line up
 
ken yeang

ken yeang

6,000 RPM
Senior Member
Feb 2, 2006
6,617
1,327
1,713
From legal standpoint, cannot be done due to the allowance of 25% engine capacity. (donno about kopiko-power though to have inspection "pass")
The engine can be transplanted but the brake system should be upgraded too coz the existing brakes are puny too.
 
mag9556

mag9556

2,000 RPM
Senior Member
Jul 11, 2006
2,770
43
1,648
ken yeang said:
From legal standpoint, cannot be done due to the allowance of 25% engine capacity. (donno about kopiko-power though to have inspection "pass")
The engine can be transplanted but the brake system should be upgraded too coz the existing brakes are puny too.
Click to expand...
donations speaks...:smokin::adore:lolxxxx
 
^pomen_GTR^

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
other car make limit is 30%

but proton stuck at 25% due to too many 4g63 proton accident casess so they revamped that law for proton...dayummm
 
J

jujitsuka

Junior Member
Senior Member
Thread starter
Jun 11, 2007
7
0
1,501
so does anyone knows of any good workshops in Malaysia to swap from say 1.6 litre to 2.3 litre or 2.5 litre? wanna know is its inconspicuous...
 
You must log in or register to reply here.
Similar threads   Forum
Mazda Astina 323 Carburetor Modification Mazda/Ford
2013 Mazda CX-5 modification & accessories Mazda/Ford
2017 Mazda CX-5 Mazda/Ford
Mazda 3 2.0L Skyactiv Mazda/Ford
mazda 2 atf m-v Mazda/Ford
Question on Mazda 3 CBU '09-10 2.0 sedan Mazda/Ford
Mazda 3 MPS performance parts - anybody looking? Mazda/Ford
Mazda 2 : what is the suitable spark plug ? Mazda/Ford
Opening boot in CBU mazda3 2014 Mazda/Ford
Mazda 2 : what is the suitable engine oil Mazda/Ford
  Similar Threads  
Mazda Astina 323 Carburetor Modification Mazda/Ford
2013 Mazda CX-5 modification & accessories Mazda/Ford
2017 Mazda CX-5 Mazda/Ford
Mazda 3 2.0L Skyactiv Mazda/Ford
mazda 2 atf m-v Mazda/Ford
Question on Mazda 3 CBU '09-10 2.0 sedan Mazda/Ford
Mazda 3 MPS performance parts - anybody looking? Mazda/Ford
Mazda 2 : what is the suitable spark plug ? Mazda/Ford
Opening boot in CBU mazda3 2014 Mazda/Ford
Mazda 2 : what is the suitable engine oil Mazda/Ford

The Marketplace Latest

Recent Posts

Random Post Every 5 Minutes

F
a/f meter signal too low,what may happened
My friend who own a mitsu engine with its O2 sensor connect to apexi timer get a very low reading on O2 voltage,0.07 to 0.18volt only.last time it was fine can get normal reading.
sensor already change to another unit but still the same scenario.
the O2 sensor is a 2 wire unit.(blue/white)
i measure the voltage direct from the sensor both wire and get 0.1v same as what shown in the timer.Then i measure with a multimeter,the signal wire (+)and the chasis(-) ground then i get 0.45v...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Total: 935 (members: 1, guests: 934)

Enjoying Zerotohundred?

Log-in for an ad-less experience