[WTS]SmartEye HID!! High Quality HID!!

Status
Not open for further replies.
Exterior and Body

[WTS]SmartEye HID!! High Quality HID!!

Wayne85

Known Member
Senior Member
Apr 12, 2006
94
0
1,506
SmartEye HID! OEM From Taiwan! High Quality HID!

SmartEye Is A Very Well Known Brand In America & Euro Countries!
Http://www.hidoutlet.ca/hid_system_smarteye.htm
Http://www.4spycameras.com/smhid60lasy.html
Http://xen-on.hu/arak.htm





Color Temperature: 4300k,5000k,6000k,8000k,10000k,12000k. (Color Temperature Same As BOSCH HID)

Ballast Color: Black, Silver

Bulb Size: H1,H3,H4,H7,H8,H10,H11,H13,9004,9005,9006,9007,D2S

HID Type: Low Beam Only, High Beam Only, Hi(Halogen)/Lo(Xenon) Beam, Hi/Lo Double HID, Magnetic Hi/Lo HID.

Lifespan: 2,000-3,000 Hours (Bulb), 3~5 Years (Ballast)

Power & Voltage: 12V, 35W/12V, 55W/24V, 35W/24V, 55W

Warranty: 1 Year (1 to 1 Exchange Bulbs & Ballasts Within 1 Day*)


*Terms & Condition Applied


Package Comes With:
2x Xenon Bulbs With Glare Shields
2x Water Proof Ballasts With Built-In Starter/Igniter
2x Secure Mounting Brackets
1x Relay Harness With Built-In 15A Fuses
All Necessary Wires & Install Accessories
Installation Instruction Manual
Warranty Card & Box


Price Is NOT Including For Installation & Local Shipping Fee

Any Enquiry (Information, Prices) Please Use The Contact Below:

Contact: 016-8344366 Wayne (Preferred SMS)
MSN: [email protected]
E-Mail: [email protected]
 
Last edited:

joe_mivec

Known Member
Senior Member
Jun 29, 2005
195
0
1,516
PENANG
how much is it bro?
 

sooenson

Known Member
Senior Member
Jan 25, 2005
128
0
3,016
Kuala Lumpur
Visit site
yeah man bro, how much is it? i am looking at H11 6000k. planning to fix my fog lamp. would you gimme your best price? if reasonable, then i might consider to change my current one on my headlamp as well, which is the common h4.
 
Status
Not open for further replies.

Random Post Every 5 Minutes

I have a cm5a terbalik 4g93t engine and a FWD 4g93 gearbox in the shed.
They will both bolt together
I have a clutch/pressure plate that fits the gearbox
The clutch/pressure plate fits my flywheel
BUT the starter wont reach the flywheel in terms of length and width

What in my setup is wrong. I'm losing my mind lol
Please point me in the right direction. Coz I know this is a really common swap so I don't know what the problem is.

Cheers
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience